摘要
Chemically modified pullulan was evaluated for its sorption efficiency and selectivity to remove cadmium（Cd） from spiked high-hardness groundwater（GW）. Pullulan esterified with succinic anhydride using dimethylaminopyridine showed a fairly high degree of substitution value as confirmed by1 H NMR spectroscopy. Pullulan succinate（Pull-Suc） was converted into the sodium salt（Pull-Suc-Na）. The effect of contact time（5–200 min） and p H（2–8） on Cd-uptake by the sorbent（Pull-Suc-Na） was investigated. The sorbent showed more than 90% Cd-removal in first 15 min from distilled water（DW） and GW solution,respectively. Comparison of Pull-Suc-Na with other polysaccharidal sorbents suggested its high efficiency（DW 476.2 mg/g and GW 454.5 mg/g） and selectivity for the removal of Cd by an ion exchange mechanism, which is further supported by the negative Gibbs free energy values calculated from Langmuir isotherms. A Langmuir isotherm kinetic model provided the best fit for the sorption of Cd using Pull-Suc-Na. The sorbent showed a negligible decrease in Cd-uptake over three regeneration cycles. The thermal stability testing of the sorbents indicated that Pull-Suc-Na（sorbent） is more stable than Pull-Suc.
Chemically modified pullulan was evaluated for its sorption efficiency and selectivity to remove cadmium（Cd） from spiked high-hardness groundwater（GW）. Pullulan esterified with succinic anhydride using dimethylaminopyridine showed a fairly high degree of substitution value as confirmed by1 H NMR spectroscopy. Pullulan succinate（Pull-Suc） was converted into the sodium salt（Pull-Suc-Na）. The effect of contact time（5–200 min） and p H（2–8） on Cd-uptake by the sorbent（Pull-Suc-Na） was investigated. The sorbent showed more than 90% Cd-removal in first 15 min from distilled water（DW） and GW solution,respectively. Comparison of Pull-Suc-Na with other polysaccharidal sorbents suggested its high efficiency（DW 476.2 mg/g and GW 454.5 mg/g） and selectivity for the removal of Cd by an ion exchange mechanism, which is further supported by the negative Gibbs free energy values calculated from Langmuir isotherms. A Langmuir isotherm kinetic model provided the best fit for the sorption of Cd using Pull-Suc-Na. The sorbent showed a negligible decrease in Cd-uptake over three regeneration cycles. The thermal stability testing of the sorbents indicated that Pull-Suc-Na（sorbent） is more stable than Pull-Suc.
基金
the Higher Education Commission, Pakistan, for funding under the scheme "HEC Indigenous 5000 Fellowships" with grant number PIN 074-1392-Ps4-584
