期刊文献+

透明转发器多载波交调干扰建模与仿真 被引量:2

Modelingand Simulation of Transparent Transponder Multi-carrier Intermodulation
下载PDF
导出
摘要 透明转发器主要将接收的信号低噪声放大,然后混频再发射回地面,由于结构简单,是目前使用较多的一种。但由于透明转发器的行波管(TWTA)具有非线性放大特性,当多路载波同时转发时,将产生严重的交调干扰。论文针对该现象,在0MHz^36MHz带宽内,模拟多路载波经过转发器放大,建立Saleh功放模型,来进行Matlab仿真分析。通过该实验,研究功放的非线性特性以及多载波互调干扰,对转发器合理分配信道路数以及最大限度使用通信容量有重要意义。 Transparent transponder mainly receives signal ,and amplifies it at the price of low noise ,and then launch back to the ground .Because of its simple structure ,it is one of the currently used .But owing to the nonlinear amplifier fea‐tures of the traveling wave tube(TWTA) of transparent transponder ,when multiple carriers go at the same time ,it will re‐sult in serious intermodulation interference .In this paper ,aiming at the phenomenon ,within 0 - 36M Hz bandwidth ,we ana‐log multiplexer carrier repeater amplification process with the Matlab simulation .Through the experiment ,we reaserch on the multicarrier intermodulation interference ,and find it will be more rational to distribute channel and we can make the best use of the repeater communication capacity too .
出处 《舰船电子工程》 2015年第11期84-87,共4页 Ship Electronic Engineering
关键词 透明转发器 QPSK调制 成形滤波器 载波交调 Saleh Matlab仿真 transparent transponder, QPSK modulation, line filter, carrier intermodulation, Saleh, Matlab simulation
  • 相关文献

参考文献7

二级参考文献20

共引文献53

同被引文献11

引证文献2

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部