期刊文献+

基于ARM+FPGA的影像交互与显示系统设计 被引量:1

Design of image interaction and display system based on ARM+FPGA
下载PDF
导出
摘要 为促进航空测绘信息获取的数字化、一体化、实时化,本文利用FPGA(Field-Programmable Gate Array,即现场可编程门阵列)并行处理的优势结合ARM处理器低功耗高性能的特点,基于ARM+FPGA的双核硬件架构实现了影像的交互与显示。该系统以Linux操作系统为软件开发平台,以ARM11嵌入式处理器为硬件核心、FPGA作为协处理器,采用FPGA片内FIFO(First Input First Output,即先进先出存储器)作为ARM处理器与FPGA之间的高速通信桥梁,针对Linux 2.6.36内核完成了对FPGA设备的驱动设计,并基于Qt图形用户界面实现了影像的实时显示。测试结果表明,ARM处理器与FPGA之间能够实现VGA(640×480)图像的高速交互,帧率可达26帧/s,最大传输带宽为182Mbps。该系统不仅体积小、功耗低、成本低,而且稳定性好、功能强,能够满足航空遥感摄影系统的实时性要求。 To promote the integration of mapping information obtained,image interaction and display are realized based on the dual-core ARM+FPGA hardware architecture in this paper by taking full ad-vantage of the parallel processor FPGA (Field-Programmable Gate Array)and the high-performance ARM processor.The real-time image display is realized based on Qt graphical interface and the driven design of FPGA FIFO (First Input First Output)is completed in the Linux 2.6.36 kernel which uses Linux operating system as the software platform,ARM1 1 as the core of embedded hardware processor and FPGA as the coprocessor.The test results show that it could achieve high speed VGA (640×480) format image interaction between ARM and FPGA with the maximum frame rate of 26 fps and the maximum transmission bandwidth of 182 Mbps.This system not only has the advantages of small vol-ume, low power consumption, low cost, but also has good performance of stability and functionality.Moreover,it could meet the real-time requirements for the aerial remote sensing system.
出处 《液晶与显示》 CAS CSCD 北大核心 2015年第6期979-986,共8页 Chinese Journal of Liquid Crystals and Displays
基金 国家重大科学仪器设备开发专项(No.2012YQ160185)~~
关键词 ARM 嵌入式LINUX FPGA 设备驱动 影像显示 ARM embedded Linux FPGA device driver image display
  • 相关文献

参考文献6

二级参考文献35

共引文献30

同被引文献13

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部