摘要
激光焊接I-core三明治板常用的刚度设计公式,没有考虑接头几何参数的影响,在实际应用中其准确性受到影响.通过外伸三点弯曲试验,对六种接头几何参数的I-core全钢三明治板的弯曲刚度和剪切刚度进行测量,并结合有限元计算,分析了接头几何参数对弯曲刚度和剪切刚度的影响.结果表明,增加焊缝宽度可显著提高弯曲刚度和剪切刚度,而焊缝宽度大于60%芯板厚度后,焊缝宽度对刚度的影响减小.间隙对刚度的影响可忽略.基于此结果,对三明治板设计时常用的刚度公式进行了修正.
For laser welded I-core steel sandwich plates,in the design formulas of the stiffness the influence of joint geometric parameters are not considered commonly. Therefore the accuracy is lack in practice. The three-point bending tests were investigated for the sandwich plates with six kinds of joint geometric parameter by self-designed device together with the finite element simulations. The aim is to research the effect of joint geometric parameters on the bending stiffness and shear stiffness.The results showed that the increase of weld width can significantly improve the bending stiffness and shear stiffness. However,when the weld width is greater than 60% thickness of coreplates,the increase of stiffness became slow. The influence of root gap to the stiffness can be ignored. Based on these results,the corrected and simplified stiffness formula was offered for sandwich plate stiffness design considering joint geometry parameters.
出处
《焊接学报》
EI
CAS
CSCD
北大核心
2015年第11期45-48,115,共4页
Transactions of The China Welding Institution
基金
国家自然科学基金重点资助项目(51035004)
宁夏大学人才引进科研启动基金资助项目(BQD2014021)
