1White G, Broussard J E, Collin J E, et al. Materials Reliability Program: Advanced FEA evaluation of growth of postulated cir- cumferential PWSCC flaws in welds (MRP-216, Rev.1) [Jl (1015383) pressurizer nozzle dissimilar metal EPRI Palo Alto CA Report, 2007.
2Fredette L F, Scott P M, Brust F W, et al. An Analytical evalua- tion of the effect of weld material thickness on residual stresses pro- duced by structural weld overlays on pressurized water reactor pri- mary cooling piping[C ]//ASME 2009 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2009: 409-415.
3Brust F W, Zhang T, Shim D J, et al. Summary of weld residual stress analyses for dissimilar metal weld nozzles [C ]//ASME 2010 Pressure Vessels and Piping Division/K-PVP Conference. American Society of Mechanical Engineers, 2010:1 521-1 529.
4Song T K, Oh C Y, Kim J S, et al. ]'he safe-end length effect on welding residual stresses in dissimilar metal welds of surge nozzles [J]. Engineering Fracture Neehanies, 2011, 78(9): 1 957-1 975.
5Mur6nsky O, Smith M C, Bendeich P J, et al. Validated numeri- cal analysis of residual stresses in Safety Relief Valve (SRV) nozzle mock-ups [J ]. Computational Materials Science, 2011, 50 (7) : 2 203-2 215.
6ASME. ASNE boiler and pressure vessel code, Section ]I , Part D- Properties [ S ]. 2007.
7ASME. ASME boiler and pressure vessel code [ S ]. Section IX- Welding and brazing qualification. 2007.
8API 579-1/ASME FFS-1-2007 Fitness-For-Service, Annex E- Residual stresses in a fitness-for-service evaluation [S ]. AmericanPetroleum Institute, 2007.
