期刊文献+

Microstructure and Lattice Parameters of AIN Particle-Reinforced Magnesium Matrix Composites Fabricated by Powder Metallurgy 被引量:4

Microstructure and Lattice Parameters of AIN Particle-Reinforced Magnesium Matrix Composites Fabricated by Powder Metallurgy
原文传递
导出
摘要 Magnesium matrix composites reinforced with AlN particles were fabricated by the powder metallurgy technique. The evolution of lattice constants and solid solubility levels of Al in α-Mg and the microstructure of Mg-Al/AlN composites were investigated in the present study. The results showed that the solid solubility of Al in α-Mg reached a relatively high level by the P/M process with a long time of milling. X-ray diffraction showed that the peaks of Mg phase clearly shifted to higher angles. The lattice constants and cell volume decreased significantly compared with those of standard Mg due to a significant amount of Al incorporated into α-Mg in the form of substitutional solid solution. The degree of lattice deformation decreased at a low sintering temperature and increased at higher sintering temperatures due to the presence of AlN. Microstructural characterization of the composites revealed a necklace distribution of AlN particles in the Mg matrix. Heat treatment led to precipitation of Mg17Al12 from the supersaturated α-Mg solid solution. The pre- cipitate exhibited granular and lath-shaped morphologies in Mg matrix and ftocculent precipitation around AlN particles. Magnesium matrix composites reinforced with AlN particles were fabricated by the powder metallurgy technique. The evolution of lattice constants and solid solubility levels of Al in α-Mg and the microstructure of Mg-Al/AlN composites were investigated in the present study. The results showed that the solid solubility of Al in α-Mg reached a relatively high level by the P/M process with a long time of milling. X-ray diffraction showed that the peaks of Mg phase clearly shifted to higher angles. The lattice constants and cell volume decreased significantly compared with those of standard Mg due to a significant amount of Al incorporated into α-Mg in the form of substitutional solid solution. The degree of lattice deformation decreased at a low sintering temperature and increased at higher sintering temperatures due to the presence of AlN. Microstructural characterization of the composites revealed a necklace distribution of AlN particles in the Mg matrix. Heat treatment led to precipitation of Mg17Al12 from the supersaturated α-Mg solid solution. The pre- cipitate exhibited granular and lath-shaped morphologies in Mg matrix and ftocculent precipitation around AlN particles.
出处 《Acta Metallurgica Sinica(English Letters)》 SCIE EI CAS CSCD 2015年第11期1354-1363,共10页 金属学报(英文版)
关键词 Metal matrix composite AIN particle MICROSTRUCTURE Lattice parameter Powder metallurgy Solid solubility Metal matrix composite AIN particle Microstructure Lattice parameter Powder metallurgy Solid solubility
  • 相关文献

参考文献32

  • 1M.A. Thein, L. Lu, M.O, Lai, Compos. Struct. 75, 206 (2006).
  • 2J. Liu, C. Suryanarayana, D. Ghosh, G. Subhash, L. An, J. Alloys Compd. 563, 165 (2013).
  • 3Y. Cai, M.J. Tan, G.J. Shen, H.Q. Su, Mater. Sci. Eng. A 282, 232 (2000).
  • 4X.J. Wang, X.S. Hu, K.B. Nie, K.K. Deng, K. Wu, M.Y. Zheng, Mater. Sci. Eng. A 545, 38 (2012).
  • 5X.J. Wang, N.Z. Wang, L.Y. Wang, X.S. Hu, K. Wu, Y.Q. Wang, Y.D. Huang, Mater. Des. 57, 638 (2014).
  • 6Q.C. Jiang, H.Y. Wang, B.X. Ma, Y. Wang, F. Zhao, J. Alloys Compd. 386, 177 (2005).
  • 7H.M. Fu, M.X. Zhang, D. Qiu, P.M. Kelly, J.A. Taylor, J. Alloys Compd. 478, 809 (2009).
  • 8R.J. Bruls, H.T. Hintzen, G. de With, R. Metselaar, J. Eur. Ceram. Soc. 21, 263 (2001).
  • 9H.A. Toutanji, D. Friel, T. E1-Korchi, R.N. Katz, G. Wechsler, W. Rafaniello, J. Eur. Ceram. Soc. 15, 425 (1995).
  • 10S.S.S. Kumari, U.T.S. Pillai, B.C. Pai, J. Alloys Compd. 509, 2503 (2011).

同被引文献85

引证文献4

二级引证文献43

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部