期刊文献+

液压机械无级变速器机械变速机构的传动误差分析 被引量:2

Analyses of Transmission Error of Mechanical Shift Gear in HMCVT
下载PDF
导出
摘要 以东方红某型号拖拉机液压机械无级变速器中的机械变速机构为研究对象,探究其传动误差随时间的变化规律,目的是减少变速器的功率损耗。利用当量啮合误差原理,建立变速器中行星齿轮组、定轴齿轮副和两者共同作用时的传动误差与时间的关系式。比较各挡位的总传动误差和行星齿轮组传动误差,得到瞬时总传动误差最大、最小的挡位以及总传动误差的主导因素。在角频率相同时,行星齿轮组传动误差和定轴齿轮副传动误差存在耦合关系。利用蒙特卡罗法,验证了研究所得规律的正确性。建立总传动误差与功率损耗的关系式,结果表明两者存在正比关系。以减小传动误差为目的,提出了减少变速器功率损耗的措施。 Based on the mechanical shift gear in HMCVT of Dongfanghong,the rules of the trans-mission error changing with time were researched to reduce the power loss of the transmission.The formula among transmission errors of planetary gear set,fixed-axle gear pair,the two factor function simultaneously and time were established by using the theory of equivalent mesh error.The gear which had the transient maximum and the minimum transmission errors and the dominant factor of transmission errors were found by comparing the whole transmission error and the transmission errors of planetary gear set.There existed coupling relationship among the transmission errors of planetary gear set and fixed-axle gear pair when the angular frequency was the same.The correctness of the rules was verified by using the Monte-Carlo method.The formula among transmission errors and pow-er loss was established.It turns out that there is positive relationship among them.The measures which reduce the power loss of transmission were put forward by using the method which was used to reduce the transmission errors.
机构地区 河南科技大学
出处 《中国机械工程》 EI CAS CSCD 北大核心 2015年第23期3253-3259,共7页 China Mechanical Engineering
基金 国家自然科学基金资助项目(51375145)
  • 相关文献

参考文献15

  • 1徐立友,周志立,彭巧励,王彬彬.多段式液压机械无级变速器方案设计与特性分析[J].中国机械工程,2012,23(21):2641-2645. 被引量:27
  • 2日高照晃,王宏猷,石田武.ほが、サイクロイド齒車を用いたK-H-V形遊星齒車装置の回转传达误差に开する易研究(第1报,解析方法)[C]//日本耱械学会论文集(C编).東京,1994: 645-653.
  • 3Blanche J G,Yang D C. Cycloid Drives with Machi-ning Tolerances[J]. AEME Journal of Mechanisma,Transmissions? and Automation in Design, 1989,lll(9):337-344.
  • 4Litvin F L, Gonzalezpere I,Fuentes A, et al. To-pology of Modified Surfaces of Involute HelicalGeras with Line Contact Developsd for Improve-ment of Bearing Contact, Reduction of TransmissionErrors, and Stress Analysis[J]. Mathematical andComputer Modelling, 2005, 42(5) : 1063-1078.
  • 5Nagahata D,Hendricx W,Anthonis J,et al. Re-ducing Gear Whine of a Valtra Continuous VariableTransmission[C]//VDI-MEG. Hanover, 2009 : 113-122.
  • 6Pears J,Smith A, Curtis S. A Software Tool forthe Prediction of Planetary Gear Transmission Error[C]//VDI Beriche.Hanover, 2005 : 357-372.
  • 7Kahramn A. Load Sharing Characteristics of Plane-tary Transmission[J]. Mech. Mach. Theory, 1994,29(8) : 1151-1161.
  • 8Kahramn A. Static Load Sharing Characteristics ofTransmission Plametary Gear Sets,Model and Ex-periment, Society of Automotive Engineers[J].SAEPaper,1999-01-1050.
  • 9邵晓荣.齿轮制造及安装误差对行星齿轮均载系数的影响[J].东北重型机械学院学报,1994,18(4):306-309. 被引量:12
  • 10Parker R G,Lin Jian. Modeling, Modal Proper-ties. and Mesh Stiffness Variation Instabilities ofPlanetary Gears [J]. Journal of Tribology,2001 :NASA/CR-2001-210939.

二级参考文献54

共引文献122

同被引文献23

引证文献2

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部