Tungsten Resource-Saving： Cobalt Cermets Wastes Recycling and Concentrates Extraction
Tungsten Resource-Saving： Cobalt Cermets Wastes Recycling and Concentrates Extraction
摘要
Potentials range is determined in which the cobalt-tungsten alloy phase selectively dissolved in solutions of phosphoric acid to form soluble compounds of these metals, while the tungsten carbide phase remains in the precipitate. It shows that tungsten ores and concentrates are decomposed at 1,050℃-1,100℃ in sodium chloride-sodium metasilicate melts to form two immiscible phases, namely, halide-tungstate, containing 96% to 99% of tungsten, and silicate, containing 90% of the rest ore components.
参考文献25
-
1Klyachko, L. 1., and Leytman, M. S. 2005. "Tungsten Scrap: Recycling Technology and the Russian Market." Non-ferrous Metals 3: 101 - 104.
-
2Pivovarov, M. N., and Vlasova, A. V. 2003. "New Recycling Method for Waste Hard Alloy Lumps." New Technology 1: 89-95.
-
3Shapoval, V. I., Malyshev, V. V., and Sushinskii, N. M. "Extraction of Diamonds and Tungsten from Waste Cutting and Drilling Tools." Ecotechnologies and Resource-Saving 6: 46-52.
-
4Merkulov, V. F., Adelshin, Yu. G., and Zhdanovich, K. K. 1984. "Technology of Tungsten Recycling form Drilling Bits Wastes." Steel 10: 30-32.
-
5Gulisija, Z., Odanovic, Z., and Gulisija, R. 1995. "Investigation of a Technical Method for the Reclamation of Hard Metal Scrap." Sci. Sinter 27:211-217.
-
6Liu, X., Xu, S., and Wang, K. 2003. "Recycling of WC-Co Alloys." Non-ferrous Metals 55: 59-61.
-
7Alkatsev, M. I., Svistunov, N. V., and Trocenko, 1. G. 2008. "Regeneration of Solid WC-Co Alloy with Gaseous Zinc." Non-ferrous Metallurgy 3: 17-21.
-
8Chyzhykov, D., Trusova, V., and Hazan, A. 1976. A Method of Rare Refractory Metal Recycling by Oxidation. USSR Patent 528,341, filed November 27, 1974, and issued September 15, 1976.
-
9Zarubitsky, O. G., Orel, V. P., and Dmitruk, B. F. 2004. "Pyrochemical Technology of Tungsten and Cobalt-Containing Raw Materials." Journal of Applied Chemistry 77:1761 - 1763.
-
10Nikolaev, A. 1., Mayorov, V. G., and Kopkov, V. K. 2003. "Low-Waste Technology of Carbide Materials Processing to Give Compounds of Cobalt and Tungsten." In Resource-Reproducing, Low-Waste and Environmentally Friendly Technologies of Natural Resources Development, 148-149.
-
1汪的华,邹津耘,邱万川,苏解清.α黄铜选择性溶解的研究[J].腐蚀科学与防护技术,1996,8(3):190-194.
-
2Liu, N,Hu, ZH,Cui, K,Liu, CL.MECHANICAL PROPERTIES AND MICROSTRUCTURES OF Ti(C,N) BASED CERMETS[J].中国有色金属学会会刊：英文版,1996,6(4):117-121. 被引量：1
-
3王赛玉,熊惟皓.Microstructure and mechanical properties of Ti(C, N)-based cermets with different molybdenum contents[J].中国有色金属学会会刊：英文版,2005,15(S3):148-152.
-
4黄乃宝,梁成浩,郭华.抛光液对304钢在模拟PEMFC阳极环境中电化学行为的影响[J].腐蚀科学与防护技术,2009,21(2):218-220. 被引量：2
-
5C20030303镍氢电池负极残片中合金粉的回收及再生[J].中国科技产业,2003(3):80-80.
-
6方智,吴荫顺,曹备,朱日彰.奥氏体304不锈钢在活化态下的应力腐蚀与马氏体相变[J].中国腐蚀与防护学报,1994,14(4):277-282. 被引量：15
-
7周保仓.干-湿循环条件下奥氏体不锈铜钝化膜的生长过程[J].不锈,2014,0(4):25-30.
-
8Ashfaq H.Khosa,Rameez-ul-Islam,Farhan Saif.Remote preparation of atomic and field cluster states from a pair of tri-partite GHZ states[J].Chinese Physics B,2010,19(4):69-76.
-
9Akhtar Farid.Stainless steel binder for the development of novel TiC-reinforced steel cermets[J].Journal of University of Science and Technology Beijing,2006,13(6):546-550.
-
10刘文.清洁氧化钒生产工艺的分析[J].铁合金,2010,41(4):12-14. 被引量：1
