期刊文献+

HRB400钢中钒铌合金对氮溶解度影响的热力学研究 被引量:1

Thermodynamic study on the effect of Nb-V alloy on the nitrogen solubility in HRB400 steel
原文传递
导出
摘要 通过热力学计算研究了某厂HRB400钢中氮的溶解热力学及V、Nb合金含量对N溶解度的影响,研究结果表明:添加钒铌可有效提高氮的溶解度,但随着其含量的增加氮溶解度并不是单调递增的;以目前成品钢合金含量(质量分数)水平(V0.02%、Nb0.03%),添加铌比钒对提高氮的溶解度更有效. The solubility of nitrogen and the influence of the content of vanadium and niobium alloy on the solubility of nitrogen in HRB400 were studied by thermodynamic calculation. The results show that the addition of vanadium and niobium can increase the solubility of nitrogen without monotone relationship,and as the current content of alloy element in steel( V0. 02% 、Nb0. 03%),niobium is more effective to improve the solubility of nitrogen.
出处 《工程科学学报》 EI CAS CSCD 北大核心 2014年第S1期6-9,共4页 Chinese Journal of Engineering
基金 中央高校基本科研业务费资助项目(FRF-TP-13-004A) 国家自然科学基金资助项目(51304016)
关键词 HRB400 合金化 溶解度 热力学计算 HRB400 alloying solubility thermodynamic calculation
  • 相关文献

参考文献7

二级参考文献22

  • 1完卫国,王莹,吴结才.钒氮微合金化技术的研究与应用综述[J].江西冶金,2004,24(5):26-30. 被引量:16
  • 2王蓬,杨帆,李宏伟,马红权,王海舟.钒氮合金中高氮检测的新方法[J].钢铁钒钛,2005,26(3):64-68. 被引量:13
  • 3王厚昕,李正邦.中国热轧带肋钢筋的发展和现状[J].中国冶金,2006,16(6):6-9. 被引量:21
  • 41,Korchynsky M,Paules J R. Microalloyed Forging Steels— A State of the Art Review. SAE Technical Paper Series, 890801, SAE Int. Congress and Exposition, 1989.
  • 52,Glodowski R J, Korchynsky M, Banerji S K. Physical Metallurgy Applications and Enhanced Machinability of Microalloyed V-Ti-N Forging Steels. SAE Technical Paper Series, 980884, SAE Int. Congress and Exposition, 1998.
  • 63,Ballinger N K, Honeycombe W K. The Effect of Nitrogen on Precipitation and Transformation Kinetics in Vanadium Steel. Metall. Trans., 11A, 1980,421~429.
  • 74,Zajac S,Lagneborg R, Siwecki T. The Role of Nitrogen in Microalloyed Steels. Microalloying '95 Pittsburgh, PA, ISS, 1995, 321~338.
  • 85,Korchynsky M. Glodowski R. The Role of Nitrogen in Microalloyed Forging Steel. Ⅱ International Conference of Forging/Brazil, Proto Alegre-RS, Oct.1998.
  • 97,Osuzu H. Application of Microalloyed Steels to Achieve High Toughness in Hot Forged Components Without Further Heat Treatments. SAE Technical Paper Series, 860131, SAE Int. Congress and Expositon, 1986.
  • 108,Zajac S, Siwecki T, Hutchinson W B, et al. The Role of Carbon in Enchancing Precipitation Strengthening of V-Microalloyed Steels. Conf. Proc. of Int. Symposium on Microalloying in Steels:New Trends for the 21st Century, Sept. 7~9, 1998, San-Sebasitian, 295~302.

共引文献74

同被引文献7

引证文献1

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部