期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

含Al_2Y化合物中间合金对AZ31镁合金组织的影响

Effect of Master Alloy Containing Al_2Y Compound on Microstructure of AZ31 Mg Alloy
下载PDF
导出
摘要 研究了含Al_2Y化合物中间合金对AZ31镁合金铸态组织及晶粒细化行为的影响,探讨了Al_2Y对镁合金组织细化的机理。结果表明:挤压态中间合金晶粒较细小,第二相Al_2Y分布也较均匀;Al_2Y化合物对AZ31细化作用较明显,当其含量为1.5%时细化效果最好。 The effects of Al2Y intermetallic compound on the microstructure and grain refinement behavior of AZ31 Mg alloy were studied. The refinement mechanism of Al2Y on Mg alloys was discussed. The results show that the grain size of extruded master alloy is smaller and second phases Al2Y are uniform distribution. The refinement of Al2Y compound on AZ31 alloy is fairly pronounced, and Al2Y master alloy with the content of 1.5wt% presents the best refining effect.
作者 许明圣
机构地区 平高集团有限公司
出处 《热加工工艺》 CSCD 北大核心 2015年第24期68-70,74,共4页 Hot Working Technology
基金 国家高技术研究发展计划(863计划)基金资助项目(2011AA05A121)
关键词 镁合金 中间合金 Al2Y 组织 晶粒细化 Mg alloy master alloy Al2Y microstructure grain refinement
分类号 TG146.22 [金属学及工艺—金属材料]
  • 相关文献

参考文献14

  • 1丁道云.材料科学与技术丛书(第8卷)非铁合金的结构与性能[M].北京:科学出版社,1999.101.
  • 2潘复生,张津,张喜燕,轻合金材料耨技术[M].北京:化学工业出版社.2008.
  • 3余琨,黎文献,王日初.镁合金塑性变形机制[J].中国有色金属学报,2005,15(7):1081-1086. 被引量：63
  • 4Chapuis A, Driver J H. Temperature dependency of slip and twinning in plane strain compressed magnesium single crystals [J]. Acta. Mater, 2011,59:1986-1994.
  • 5W Hutchinson, M Barnett. Effective values of critical resolved shear stress for slip in polycrystalline magnesium and other hcp metals [J]. Ser. Mater,2010,63:737-740.
  • 6张娅,马春江,卢晨.变形镁合金的塑性变形机制与动态再结晶[J].轻合金加工技术,2003,31(7):35-39. 被引量：35
  • 7于彦东,张凯锋,蒋大鸣,郑海荣,王长丽.轧制镁合金超塑性和超塑胀形[J].中国有色金属学报,2003,13(1):71-75. 被引量：35
  • 8Agnew S R, Duygulu 0. Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B [J]. Int. J. Plasticity,2005,21 : 1161-1193.
  • 9Razavi S M, Foley D C, Karaman I, et al. Effect of grain size on prismatic slip in Mg-3AI-1Zn alloy [J]. Scr. Mater, 2012,67: 439-442.
  • 10ObaraT, Yoshinga H, Morozumi S. {1122}<1123> Slip system in magnesium[J]. Acta. Metallurgica, 1973,21:845-853.

二级参考文献27

  • 1吉泽升.日本镁合金研究进展及新技术[J].中国有色金属学报,2004,14(12):1977-1984. 被引量：43
  • 2[1]Watanabe H, Mukai T. Effect of temperature and grain size on the dominant diffusion process for superplastic flow in an AZ61 magnesium alloy[J]. Acta Mater, 1999, 147(14): 3753-3758.
  • 3[2]Narayanasamy R, Sathiyanarayanan S, Ponalagusamy R. A study on barrelling in magnesium alloy solid cylinders during cold upset forming[J]. Journal of Materials Processing Technology, 2000, 101: 64-69.
  • 4[3]Narayanasamy R, Sathiyanarayanan S, Ponalagusamy R. Uniaxial tensile behaviour of ZM-21 magnesium alloy at room temperature[J]. Journal of Materials Processing Technology, 2000, 102: 56-58.
  • 5[4]Huang J C, Chuang T H. Progress on superplasticity and superplastic forming in Taiwan during 1987-1997[J]. Materials Chemistry and Physics, 1999, 57: 195-206.
  • 6[5]Bussiba A, Ben A A. Grain refinement of AZ31 and ZK60 Mg alloys-towards superplasticity studies[J]. Materials Science and Engineering A, 2001, 302: 56-62.
  • 7[6]Mabuchi M, Iwasaki H, Higashi K. Low temperature superplasticity of magnesium alloy processed by equal channel angular extrusion (ECAE) [J]. Materials Science Forum, 1997, 243-245: 547-552 .
  • 8[7]Watanabe H, Mukai T, Mabuchi M, et al.High-strain-rate superplasticity at low temperature in a ZK61 magnesium alloy produced by powder metallurgy[J]. Scripta Materialia, 1999, 41(2): 209-213.
  • 9[8]Spigarelli S, Cerri E, Evangelista E, et al. Interetation of constant-load and constant-stress creep behavior of a magnesium alloy produced by rapid solidification[J]. Materials Science and Engineering A, 1998, 254: 90-98.
  • 10[9]ZHANG Kai-feng, WANG Gang, WU De-zhong, et al. Superplastic bulging capadility of Ti-6Al-4V buttcover plate[J]. Trans Nonferrous Met Soc China, 2002, 12(2): 253-255.

共引文献127

热加工工艺
2015年 第24期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部