摘要
在锂系液体橡胶(LIR)聚合反应后期加入马来酸酐(MAH)进行接枝反应,制备了马来酸酐接枝液体异戊橡胶(LIR-g-MAH)。采用化学滴定法对比研究了LIR-g-MAH接枝率的测试方法。结果表明,直接滴定法准确度高、重复性好,且当样品用量为1.0~2.0g,水解试剂为乙醇,滴定碱标准溶液浓度为0.08~0.12mol/L时,测试条件最优。
Maleic anhydride grafted liquid isoprene rubber(LIR-g-MAH)is synthesized by maleic anhydride(MAH)and solution of liquid isoprene rubber(LIR)after polymerization reaction of LIR with lithium catalyst.The test method of grafting ratio of LIR-g-MAH was studied with chemical titration method.Results showed that the optimal determination conditions for grafting ratio of LIR-g-MAH are as follows:the direct titration method has higher accuracy and better repeatability,sample dosage is 1.0~2.0g,hydrolysis reagent is ethanol,the concentration of standard KOH-ethanol solution is 0.08~0.12mol/L.
出处
《功能高分子学报》
CAS
CSCD
北大核心
2015年第4期398-402,共5页
Journal of Functional Polymers
关键词
马来酸酐
液体异戊橡胶
接枝率
maleic anhydride
liquid isoprene rubber
grafting ratio