摘要
目的为了对试验产品的过载振动复合环境进行充分的考核,同时兼顾经济性和便捷性。方法选取橡皮绳、振动台系统进行过载复合环境试验,并分析橡皮绳、振动台系统的可行性,讨论其应用范围。结果从橡皮绳的拉伸曲线可以看出,橡皮绳的变形在5%以内刚度较大,变形超过5%刚度较小。在橡皮绳较小刚度区间,对隔振器进行振动试验,结果很好。结论采用橡皮绳、振动台系统进行隔振器过载复合环境试验不仅能够节省成本,缩短试验周期,而且能够达到很好的试验效果。
Objective To fully test the acceleration-vibration environment economically and conveniently.Methods This paper used rubber ropes and a shaker to simulate the acceleration-vibration test, analyzed the feasibility of the method and discussed its application scope. Results Rubber rope's tension test showed that it had high rigidity with less than 5% strain and low rigidity with more than 5% strain. While rubber rope was in the region of low rigidity,damper's acceleration-vibration test had very good results. Conclusion The results proved that applying this method could reduce the test cost, shorten the test period and achieved the test goal.
出处
《装备环境工程》
CAS
2015年第6期70-75,共6页
Equipment Environmental Engineering
关键词
隔振器
过载振动
复合环境试验
damper
acceleration-vibration
composite environment test