期刊文献+

二元复合体系组分对乳状液类型及稳定性影响 被引量:7

Effect of SP Composite on Type and Stability of the Emulsion
下载PDF
导出
摘要 试验模拟二元复合驱油体系及地层中原油形成乳状液条件,通过对室内模拟形成的乳状液。通过单一变量法改变形成乳状液所需的二元复合体系及原油的浓度,分别研究各变量对乳状液的稳定性及乳状液类型的影响规律。研究结果表明:对形成乳状液类型影响最大的是油水比。对于乳状液稳定性,O/W型乳状液中聚合物对乳状液体系稳定起到积极作用,活性剂浓度高于50 mg/L时起到消极作用;W/O型乳状液中聚合物不利于乳状液稳定性,活性剂随着浓度的增加对乳状液稳定性由消极作用转变为积极作用。 The configuration conditions of emulsion were studied. By using the single variable method to change the two-element complex system and the concentration of crude oil, effect of the variables on the stability of the emulsion and the type of emulsion were investigated. The results show that: the greatest impact on the formation of emulsion type is the oil / water ratio. For emulsion stability, the polymer in O/W emulsion has a positive effect on the stability of the emulsion system, and the concentration of the active agent is higher than 50 mg/L, the polymer is not conducive to the stability of W/O emulsion.
出处 《当代化工》 CAS 2015年第12期2733-2735,共3页 Contemporary Chemical Industry
基金 国家重大专项课题"油田开采后期提高采收率新技术"(2011ZX05009-004)
关键词 乳状液类型 乳状液稳定性 二元复合体系 Emulsion type Emulsion stability SP system
  • 相关文献

参考文献8

二级参考文献83

共引文献53

同被引文献58

引证文献7

二级引证文献15

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部