摘要
考虑高负载皮带输煤巷中继站粉尘浓度过高且尘源复杂的特点,以同忻矿主斜井中继站为研究对象,采用现场实测和实验分析相结合的方法对粉尘产生强度、浓度变化、粒径分布等特性进行研究分析,设计研发了基于多种传感器联合监测的全自动气水雾化除尘系统,并应用于现场。结果表明:中继站内粉尘产生强度高达3.344×10^5mg/min,且以呼吸性粉尘为主,污染严重;全自动气水雾化除尘系统的运行使得中继站内全尘和呼尘的质量浓度均下降85%左右,降尘效果明显,具有良好的实用推广性。
Considering the characteristics of excessively high dust concentration and complex dust source in the relay station of high- loading coal belt roadway,and taking the relay station of main incline shaft of Tongxin mine as the research object,the characteristics of dust producing strength,concentration variation,and particle size distribution were studied by adopting the combined method of field measurement and experimental analysis. An automatic air-water atomization dedusting system based on multi- sensor joint monitoring was designed and developed,and it was applied to the field. The results showed that the dust producing strength of relay station was up to as high as 3. 344 ×10^5mg / min,giving priority to with respiratory dust,so the pollution was serious. Both the mass concentration of whole dust and respiratory dust were decreased by about 85% with the operation of automatic air- water atomizationdedusting system,and the dedusting effect was obvious. The system has a good practical popularization.
出处
《中国安全生产科学技术》
CAS
CSCD
北大核心
2015年第12期11-17,共7页
Journal of Safety Science and Technology
基金
国家自然科学基金项目(51204087)
关键词
中继站
尘源特性
全自动
气水雾化除尘系统
除尘效果
relay station
dust source characteristics
automatic
air-water atomization dedusting system
dedusting effect