“NGN软交换系统”课程实验项目设计

Design of the Test Project for “NGN Soft Switch System”

本文对高职院校"NGN软交换系统"课程的实验项目进行了全面的设计,内容包括"NGN设备软硬件认知及网络组建与连接"和"典型组网数据配置"两大部分.其中,前一部分偏重设备的硬件、网络组建及工程连接等内容;后一部分偏重典型组网相关的数据配置.网络组建主要介绍媒体面、控制面、操作面3个独立网络的组建.典型组网配置包括基础数据配置、与AMG对接的数据配置、与SIP终端对接的数据配置、与PBX对接的数据配置、与PSTN互通的数据配置以及IP-Centrex业务配置.该项目设计为学生掌握NGN固话网组建及典型应用配置技能提供了很好的平台.

The article introduces an overall design of the test project for ＂NGNSofi Switch System ＂, which is composed of ＂Hardware and software of NGN equipment and networking＂ and ＂Configuration data for typical networking＂. The first part focuses on the hardware, networking and engineering. And the second part emphases data configuration for typical networking. Networking construction is mainly about the construction of media, signaling and controlling. Data configuration consists of the base data configuration, end-to-end jointing with AMG end-to-end jointing with SIP terminal, end-to-end jointing with PBX, end-to-end jointing with PSTN and IP Centrex service configuration. This test project design is greatly helpful for students to master the networking knowledge of NGN telephone network and skills of data configuration for typical application.