钛板焊接工艺研究

Study on titanium welding technology

通过对不同参数的钛板进行焊接对比试验,发现钛板采用脉冲焊接方法时,其机械性能较好。通过失重试验,对比了钛板在不同脉冲焊接条件下接头的耐蚀性能,试验结果表明,接头耐蚀性能与母材相当。

It is found that titanium is better in mechanical properties by pulse welding method through conducting welding comparative tests on titanium with different parameters. The corrosion resistance of the titanium joints under different pulse welding conditions were compared via the weightlessness experiment.The test result showed that the corrosion resistance of the joints were similar to that of base material.