摘要
光伏行业发展十分迅速,而硅片作为太阳能电池的重要组成部分,对其直径、厚度的要求越来越高。对于切割硅片用的线锯的研究也越来越多,与其它金刚石线锯相比,树脂结合剂金刚石线锯具有生产周期短、生产成本低、对环境污染小的优点,应用越来越广泛。分别从热固化树脂结合剂金刚石线锯和光固化树脂结合剂金刚石线锯两个方面阐述了树脂结合剂金刚石线锯的研究现状,并从降低芯线的直径、提高树脂的耐高温性以及对于树脂结合剂金刚石线锯制备工艺的改进3个方面做了展望。
Photovoltaic industry develops very rapidly, and silicon, as an important component of solar cell, is becoming stricter with its diameter and thickness. There are also more and more researches about the wire saw used in cutting silicon; compared with other diamond wire saw, resin bond diamond wire saw has been more and more widely used because of its shorter production cycle, lower cost and smaller pollution. The current research status of resin bond diamond wire saw from the perspectives of the thermal curing resin bond diamond wire saw and light curable resin bonded diamond wire saw are explored, and the future of reducing the diameter of the conductor, improving the resin＇s resistance to high temperature, resin bonded diamond saw improvement of preparation technology are prospected.
关键词
单晶硅
金刚石线锯
树脂
single crystal silicon, diamond wire saw, resin
