摘要
研究了碳纤维(CF)用量及助剂对碳纤维/PA66复合材料性能的影响。结果表明:复合材料的拉伸强度随着CF用量增加而增大,当CF质量分数超过15%时,增幅缓慢。在同一载荷下,随CF用量的增加,复合材料的摩擦系数先降低后升高,碳纤维质量分数为20%时,复合材料体系的摩擦系数最小,较PA66树脂降低了1/3;相容剂、耐磨助剂的加入,可有效改善CF/PA66复合材料的摩擦磨损性能。
The effect of carbon fiber(CF) content on the mechanical properties of CF/PA66 com- posites were studied. The results showed that the tensile strength of the composites increased with the increasing amount of CF, but, when the mass fraction of more than 15%, there was a slow increase. Under the same load, the friction coefficient of the composite system decreased first and then increased with increasing amount of CF,When CF mass fraction of 20%, the friction coefficient of the composite system was minimum,Compared with PA66 resin reduced by 1/3. Compatibility agents and wear aids have greater effect for centralizer compound system of CF/PA66 composite.
出处
《弹性体》
CAS
2015年第6期58-61,共4页
China Elastomerics
关键词
碳纤维
PA66树脂
力学性能
摩擦磨损
carbon fiber
nylon66
mechanical properties
friction and wear