期刊文献+

一种基于沃拉斯顿棱镜的多角度激光分束方法

A new splitting method of laser beam based on Wollaston prisms
原文传递
导出
摘要 提出一种基于沃拉斯顿棱镜的多角度激光分束方法。利用沃拉斯顿棱镜和双透镜组合,将飞秒激光单脉冲分束为多角度传输、具有飞秒或者更长时间间隔的多个激光脉冲;分束角度调节灵活,能量利用率高,结构简单。采用本文方法搭建了飞秒激光超快全息记录系统,并记录了4路复用的干涉条纹。实验结果表明,本文所提出的分束系统可以应用于超快全息记录系统。 Focusing on the growing demands for number and quality of laser beams, a novel method of laser beams splitting based on Wollaston prisms is proposed. In this method, a single femtosecond laser pulse beam is transformed into pulses of multi-angle transmission with femtoseeond or longer interval u- sing Wollaston prisms and two lenses. The angles of laser beams splitting can be adjusted flexibly, the energy utilization rate is high,and its structure is simple. A setup of femtosecond laser holographic recording system is constructed on the basis of the approach, and the four-way multiplexing interference fringes are recorded. The experimental results show that the proposed system can be applied in ultrafast holographic recording system.
出处 《光电子.激光》 EI CAS CSCD 北大核心 2015年第12期2370-2374,共5页 Journal of Optoelectronics·Laser
基金 国家自然科学基金科学仪器基础研究(61227010)资助项目
关键词 沃拉斯顿棱镜 角分复用 脉冲分束 飞秒激光 全息记录 Wollaston prisms angular multiplexing pulse splitting femtoseeond laser holographic re cord
  • 相关文献

参考文献20

  • 1Schille, Joerg, Schneider, et al. Process optimization in high-average-power ultrashort pulse laser microfabrica- tion: how laserprocess parameters influence efficiency, throughput and quality[J-. Applied Physics A Materials Science & Procesing,2015,120(3) :847-855.
  • 2Mishra Sanjay, Yadava Vinod. Laser beam micro machi- ning (LBMM)-A review[J]. Optics and Lasers in Engi- neering, 2015,73:89-122.
  • 3SHI Lei-lei,ZHU Tao, HUANG Dong-mei. In-fiber whisper- ing-gallery-mode resonator fabricated by femtosecond la- ser micromachining [J]. Optics Letters, 2015,40 ( 16 ) : 3770-3773.
  • 4Siaulys N, Laurent G, Andrius M. Direct holographic ima- ging of ultrafast laser damage process in thin films[JT. Optics Letters,2014,39(7) ;2164-2167.
  • 5Wang J,Zhao J L,Di J L,et al. Visual measurement of the pulse laser ablation process on liquid surface by using digital holography[J]. Journal of Applied Physics, 2014,115(17)173106.
  • 6ZhU Lin-wei, SUN Mei-yu, CHEN Jian-nong, et al. Integrat- ed digital holography for measuring the photothermal effect induced by femtosecond laser pulses[J]. Optical Engineering, 2014,53 (11) : 112311.
  • 7Kim Byung-Mok,Hwang Yong-Seok,Kim Eun-Soo. A no- vel backlight unit for volume-holographic optical ele- ments-based time-multiplexed three-dimensional displays [J]. Optics and Lasers in Engineering, 2015,74 : 28-39.
  • 8JIA Wei,LUO Yi-ming,YU Jian,et al. Effects of high-repe- tition-rate femtosecond laser micromachining on the phys- ical and chemical properties of polylactide (PLA) [J]. Optics Express 2015,23(21) :26932-9.
  • 9倪晓昌,桑丽霞,张洪杰,Anoop Kiliyanam-kandy,Salvatore Amoruso,王宣,Rosalba Fittipaldi,李彤,胡明列,徐丽娟.Femtosecond laser deposition of TiO_2 nanoparticleassembled films with embedded CdS nanoparticles[J].Optoelectronics Letters,2014,10(1):43-46. 被引量:2
  • 10CHENG Ji-yi, GU Cheng-lin, ZHANG Da-peng, et al. High- speed femtosecond laser beam shaping based on binary holography using a digitalmicromirror device[J]. Optics Letters, 2015,40(21), 4875-4878.

二级参考文献85

共引文献41

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部