期刊文献+

药型罩锥角对JPC与JET形成的影响 被引量:4

Influence on Formed JPC and JET by Liner Angle
下载PDF
导出
摘要 为了研究聚能装药药型罩锥角对聚能杆式弹丸(JPC)与金属射流(JET)形成的影响,设计了具有不同锥角药型罩的聚能装药结构,基于LS-DYNA数值仿真软件,采用ALE算法进行数值仿真。同种装药结构(包括药型罩结构参数)下,通过对药型罩锥角的改变实现聚能杆式侵彻体和金属射流之间的转换,研究JPC与JET的形成及转换临界条件,为多模战斗部聚能装药结构的设计提供参考。 In order to study the influence of penetrating body (JPC) and metal jet (JET), the shaped charge liner cover angle of cone on the cumulative rod JET formation, different angle of cone shaped charge liner of shaped charge structure was designed, based on the ANSYS/LS-DYNA numerical simulation software, with numerical simulation by ALE algorithm . In the same charge, JPC and JET were formed by different detonation initiation ways, study the formation and the transformation of critical conditions between JPC and JET, for the design of the structure of the multi-mode warhead upon the reference.
出处 《装备制造技术》 2015年第12期38-40,共3页 Equipment Manufacturing Technology
关键词 药型罩 锥角 金属射流 聚能杆式侵彻体 shaped charge liner angle of cone metal jet cumulative rod penetrating body
  • 相关文献

参考文献5

二级参考文献21

  • 1李发伯 晏成立 周光前 等.聚能炸药逆向环形起爆形成高速射流研究[J].爆炸与冲击,2000,20(3):270-273.
  • 2温万治.[D].北京理工大学机电工程学院,1998:63-64.
  • 3张宝钎,张庆明,黄风雷.爆轰物理学[M].北京:兵器工业出版社,2001:147-197.
  • 4Whelan A J, Furnisss D R, Townsley R G. Experimental and simulated (analytical & numerical) elliptical-form shaped charges[A]. Carlenone J. 20th International Symposium on Ballistics[C]. 2002:446--454.
  • 5Blache A, Weimann K. Shaped charge with jetting projectile for extended targets[A]. 17th International Symposium on Ballistics[C]. Midrand, South Africa, 1998.207--215.
  • 6Baker E L, Sdaniels A. Selectable initiation shaped charges[A]. Carlenone J. 20th International Symposium on Ballistics[C]. 2002.10.
  • 7Murphy M J. Shaped charge penetration in concrete:A unified approach[R]. Lawrence Livermore National Laboratory, UCRL-53393,1983.
  • 8李发伯.小长径比聚能装药试验研究[R].四川绵阳:中国工程物理研究院流体物理研究所,1997.
  • 9LS-DYNA Keywords User's Manual[M]. Livermore:Livermore Software Technology Corporation, 2001.
  • 10皮爱国.超高速射弹成型机理及其数值模拟研究[D].湖南长沙:国防科学技术大学,2003.

共引文献126

同被引文献61

引证文献4

二级引证文献9

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部