摘要
通过静电纺丝技术制备壳聚糖(CS)/尼龙6(PA6)复合纤维膜,然后采用合适的溶剂将PA6溶脱,获得多孔CS纤维膜。SEM表明:CS/PA6复合纤维膜经溶剂(间甲酚与乙醇体积比1∶1)溶脱后,仍保持了纤维的结构。FT-IR结果表明,PA6与CS之间可能存在氢键等相互作用。吸附数据显示:多孔CS纤维膜在pH=3时对Cr(Ⅵ)的吸附能力最强,其去除率最大,达到了95.29%。
Chitosan（CS）/Nylon 6（PA6）composite nanofibrous membrane was prepared by electrospinning technique.PA6 was dissolved off with a suitable solvent to obtain porous chitosan fiber membrane.SEM showed that the membrane remained the fiber structure after PA6 dissolved with m-cresol（the ratio of m-cresol and ethanol volume was 1∶1）.FT-IR indicated that there was weak interaction（such as hydrogen bonds）between PMMA and chitosan.Adsorption data indicated that the membrane exhibited a maximum adsorption capacity of Cr（Ⅵ）of 95.29% at pH=3.
出处
《化工新型材料》
CAS
CSCD
北大核心
2016年第1期104-106,共3页
New Chemical Materials
基金
国家自然科学基金项目(51172062
51472074)
河北省高等学校科学技术研究项目(QN2014051)
华北理工大学国家自然科学基金培育项目(GP201517)
河北省科技计划项目(15273627)
河北省百人计划项目(E2012100005)
关键词
静电纺丝
壳聚糖
尼龙6
吸附
electrospinning
chitosan
nylon 6
adsorption
