摘要
在中大尺寸菲林(film)触摸屏制造过程中,精准贴合是控制的关键。小尺寸菲林贴合工艺一般采用平面贴合方式。中大尺寸菲林贴合过程中,若采用传统平面贴合方式,机构过于庞大,设备效率和可靠性难以保证。采用立式翻转贴合方式,结构紧凑,需要精确控制翻转角度和贴合位置。研究使用伺服系统驱动丝杠导轨副完成翻转动作,通过对比分析和数值计算,设计出合理的机械结构,满足效率和可靠性要求。
During the manufacturing of large size film touch panel, the key for process controling is precision attaching Small size film attach process generally uses the plane-laminating way. If traditional plane-laminating way was adopted, the institution is so large that equipment＇s efficiency and reliability are difficult to be guaranteed in large size film attach process. Meanwhile, the structure is complicated and we should control the flip angle and joint position accurately. if the vertical flip joint method is used. Therefore, the research about using servo system to drive lead screw guide screw to complete the flip action is essential. With comparative analysis and numerical calculation, design reasonable mechanical structure can be designed. The efficiency and reliability can also meet the requirements.
出处
《电子工业专用设备》
2016年第1期47-50,共4页
Equipment for Electronic Products Manufacturing
关键词
贴合
翻转
设备可靠性
Attach process
Flip
Machine reliability
