期刊文献+

Microstructure evolution in the weld metal region of a Ni-based Inconel 718 superalloy produced by tungsten inert gas welding

Microstructure evolution in the weld metal region of a Ni-based Inconel 718 superalloy produced by tungsten inert gas welding
下载PDF
导出
摘要 The microstructure evolution of the weld metal (WM) region in a Ni-based 718 superaUoy is discussed. The superalloy sheets were welded using the tungsten inert gas process at different heat inputs. The precipitates and dendrites in the WM of each joint were analyzed by optical microscopy, scanning electron microscopy, and energy dispersive spectroscopy ( EDS). Statistics on the dendrite arm spacing and precipitates were obtained from the metallographs. Using the alloy composition determined by EDS and the phase diagram obtained using ThermoCalc, the equilibrium distribution coefficient of Nb, the temperature range of solid/liquid coexistence, and the distribution and morphology of Laves phase in different subregion of the WM were analyzed. There is lamellar segregation, regional segregation, and microsegregation in the WM. As the heat input increases, the arm spacing and the microsegregation increase. At a fixed heat input, the microsegregation rate is smallest in the crater, but with the macrosegregation seriously. The microstructure evolution of the weld metal (WM) region in a Ni-based 718 superaUoy is discussed. The superalloy sheets were welded using the tungsten inert gas process at different heat inputs. The precipitates and dendrites in the WM of each joint were analyzed by optical microscopy, scanning electron microscopy, and energy dispersive spectroscopy ( EDS). Statistics on the dendrite arm spacing and precipitates were obtained from the metallographs. Using the alloy composition determined by EDS and the phase diagram obtained using ThermoCalc, the equilibrium distribution coefficient of Nb, the temperature range of solid/liquid coexistence, and the distribution and morphology of Laves phase in different subregion of the WM were analyzed. There is lamellar segregation, regional segregation, and microsegregation in the WM. As the heat input increases, the arm spacing and the microsegregation increase. At a fixed heat input, the microsegregation rate is smallest in the crater, but with the macrosegregation seriously.
出处 《China Welding》 EI CAS 2015年第3期36-44,共9页 中国焊接(英文版)
关键词 Inconel 718 weld metal heat input arm space segregation Inconel 718, weld metal, heat input, arm space, segregation
  • 相关文献

参考文献1

二级参考文献5

  • 1欧阳容百,非平衡态统计物理学,1989年,286页
  • 2谢朝阳,西北工业大学学报,1988年,6卷,219页
  • 3毛协民,西北工业大学学报,1985年,3卷,10期,11页
  • 4闵乃本,晶体生长的物理基础,1982年,49页
  • 5王竹溪,特殊函数概论,1976年,367页

共引文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部