期刊文献+

橡胶非等温硫化工艺的数值模拟 被引量:5

下载PDF
导出
摘要 分析硫化工艺,以控制体/有限元为基础,对硫化过程的热扩散方程和硫化反应方程进行离散,建立控制方程组并编写代码进行数值模拟。结果表明:数值模拟结果与文献数据相一致。通过橡胶硫化工艺模拟可得到橡胶制品内温度和硫化度分布图,并以此优化硫化工艺,降低橡胶制品不均匀的温度场和硫化度场,有利于减少橡胶制品变形并提高其硫化质量。
作者 张韬杰 施飞
出处 《橡胶工业》 CAS 2016年第2期111-114,共4页 China Rubber Industry
基金 国家自然科学基金资助项目(11302110) 王伟民助创基金资助项目(2015014)
  • 相关文献

参考文献14

  • 1Ambelang J C, Prentice G A. Digital Method of Calculating the Flow of Heat Through a Tire during Vulcanization[J]. Rubber Chem. and Tech. , 1972,45 (5) : 1195-1201.
  • 2Schlanger H P. A One-Dimensional Numerical Model of Heat Transfer in the Process of Tire Vulcanization[J]. Rubber Chem. Tech. , 1983,56(2) :304-321.
  • 3Hubbard G D, Simpson G M. Applications of Finite Element Theory to Heat Flow in Rubber Products[A]. International Rubber Conference, Venice: 1979.
  • 4Javadi M, Moghiman M, Erfanian M R, et al. Numerical Investigation of Curing Process in Reaction Injection Molding of Rubber for Quality Improvements[J]. Key Engineering Materials, 2011 (462- 463) : 1206-1211.
  • 5Ghoreishy M H R, Naderi G. Three-Dimensional Finite Element Modeling of Rubber Curing Process[J]. Journal of Elastomers & Plastics, 2005,37 ( 1 ) : 37-53.
  • 6Darwis R, Alias N, Yaacob N, et. al. Temperature Behavior Visualization on Rubber Material Involving Phase Change Simulation[J]. Journal of Fundamental Sciences, 2009,5 (1) : 55-62.
  • 7Abhilasha P M, Kannana K, Varkey B.Simulation of Curing of a Slab of Rubber[J]. Materials Science & Engineering B, 2010,168 (1-3) : 237-241.
  • 8刘莉莉,贾玉玺,季忠.基于遗传算法和有限元方法的橡胶硫化工艺优化[J].特种橡胶制品,2004,25(1):37-41. 被引量:1
  • 9闫相桥.轮胎硫化过程的有限元分析系统[J].橡胶工业,2005,52(9):550-557. 被引量:5
  • 10闫相桥,童剑.轮胎硫化过程的数值模拟技术[J].复合材料学报,2003,20(1):67-73. 被引量:8

二级参考文献26

  • 1监凯维奇OC.有限元法 [M].北京:科学出版社,1885..
  • 2A Kurpati,S Azarm, J Wu. Constraint handling improvements for multiobjective genetic algorithms[J]. Struct Multidisc Optim, 2002,23:204-213.
  • 3R Giro, M Cyrillo, D Galvao. Designing conducting polymers using genetic algorithms[J]. Chemical Physical Letters, 2002,366:170-175.
  • 4J Keeler, E Hartman, S Piche. Process modeling and optimizing using focused attention neural networks [J]. ISA Transactions, 1998,37:41-52.
  • 5T Hanai, T Ohkim, H Honda, T Kobayashi. Analysis of initial conditions for polymerization reaction using fuzzy neural network and genetic algorithm [ J ]. Computers and chemical Engineering, 2003,27: 1011- 1019.
  • 6Goldberg D E. Genetic Algorithm in Search, Optimization and Machine Learning[M]. Addison-Wesley, 1989.
  • 7Yuan Qiang, Li Yufu, Li Guangliang. Vulcanizing kinetics of silicone rubber[J]. Chinese Journal of Polymer Science, 1988,6(4) :353-358.
  • 8Toth W J,Chang J P,Zanichelli C. Finite element evaluation of the state of cure in a tire[J]. Tire Science and Technology,1991,19(4) : 178-212.
  • 9Ambelang J C, Prentice G A. Digital method of calculating the flow of heat through a tire during vulcanization[J]. Rubber Chemistry and Technology,1972,45(5) : 1195-1201.
  • 10Prentice G A, Williams M C. Numerical evaluation of the state of cure in a vulcanizing rubber article [J]. Rubber Chemistry and Technology, 1980,53(5) : 1 023-1 031.

共引文献11

同被引文献26

引证文献5

二级引证文献14

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部