Determining N supplied sources and N use efficiency for peanut under applications of four forms of N fertilizers labeled by isotope^15N

Rational application of different forms of nitrogen（N） fertilizer for peanut（Arachis hypogaea L.） requires tracking the N supplied sources which are commonly not available in the differences among the three sources：root nodule,soil and fertilizer.In this study,two kinds of peanut plants（nodulated variety（Huayu 22） and non-nodulated variety（NN-1）） were choosed and four kinds of N fertilizers：urea-N（CONH_2-N）,ammonium-N（NH_4~＋-N）,nitrate-N（NO_3^--N） and NH_4~＋ ＋NO_3^--N labeled by^（15）N isotope were applied in the field barrel experiment in Chengyang Experimental Station,Shandong Province,China,to determine the N supplied sources and N use efficiency over peanut growing stages.The results showed that intensities and amounts of N supply from the three sources were all higher at middle growing stages（pegging phase and podding phase）.The accumulated amounts of N supply from root nodule,soil and fertilizer over the growing stages were 8.3,5.3 and 3.8g m^（-2） in CONH_2-N treatment,which are all significantly higher than in the other three treatments.At seedling phase,soil supplied the most N for peanut growth,then root nodule controlled the N supply at pegging phase and podding phase,but soil mainly provided N again at the last stage（pod filling phase）.For the whole growing stages,root nodule supplied the most N（47.8 and 43.0%） in CONH_2-N and NH_4~＋-N treatments,whereas soil supplied the most N（41.7 and 40.9%） in NH_4~＋ ＋NO_3^--N and NO_3^--N treatments.The N use efficiency was higher at pegging phase and podding phase,while accumulated N use efficiency over the growing stages was higher in CONH_2-N treatment（42.2%） than in other three treatments（30.4%in NH_4~＋-N treatment,29.4%in NO_3^--N treatment,29.4%in NH_4~＋ ＋NO_3^--N treatment）.In peanut growing field,application of CONH_2-N is a better way to increase the supply of N from root nodule and improve the N use efficiency.