摘要
通过热膨胀实验测得了在不同加热速率条件下FV520B钢奥氏体化的膨胀量变化曲线,研究了不同加热速率对相变特征温度和连续奥氏体化动力学的影响,建立了FV520B钢奥氏体化的相变动力学模型,并对其准确性与使用范围进行验证和分析,并根据此模型建立了FV520B钢圆盘工件的热-组织耦合模型,计算了工件加热、保温与淬火过程的温度与组织转变。
Dilatometric curves of FV520 B steel subjected to different heating rates were obtained by the dilatometer,the effect of heating rate on austenitization critical temperature and kinetics was investigated and the austenitization kinetics model of FV520 B steel was established. A thermal-microstructure coupled model of large disk-shaped part was achieved based on the austenitization kinetics model. The temperature and the transformation evolution during the heat treatment process were calculated.
出处
《金属热处理》
CAS
CSCD
北大核心
2016年第2期183-187,共5页
Heat Treatment of Metals
基金
国家重点基础研究发展计划(973计划)(2011CB013404)
国家自然科学基金委员会和中国工程物理研究院联合基金(11176013)
关键词
FV520B钢
加热速率
奥氏体化动力学
快速升温过程
热-组织耦合模型
FV520B steel
heating rates
austenite transformation kinetics
rapid heating process
thermal-microstructure coupled model
