多路红外线防盗监测系统设计

Multichannel Infrared Anti-theft System Design

文章是基于STC89C52RC单片机设计的红外无线防盗报警系统,自动监测发生在布防监测区域内的侵入行为,产生报警信号。一旦发生突发事件,就能通过声光报警信号,在安保控制中心发出报警信号,从而迅速采取应急措施。文章详细地描述了利用单片机控制的软件流程、程序设计及调试,并做出实物,验证系统的准确性以及故障原因分析。

This article is based on STC89C52 RC single-chip design of infrared wireless burglar alarm system,automatic monitoring in the areas protection monitoring intrusion behavior,an alarm signal。In case of emergency,you can through the sound and light alarm signal,in the center of the security control signal alarm,it quickly to take emergency measures。This paper describes in detail single-chip microcomputer control software flow,programming and debugging,and physical objects,the accuracy of the authentication system and the cause of the problem analysis。