摘要
对水下采油树进行测试验证可为水下采油树的维修保养提供参考。通过对水下采油树控制系统主参数以及水下采油树测试流程的研究,设计一套水下采油树地面测试单元液压控制系统,水下采油树地面测试单元液压控制系统包括油箱、高压泵回路、水泵回路、蓄能器组、调压回路、接口回路、回油回路等。根据系统主参数及测试要求,对液压控制系统主要元件进行主参数的计算。利用AMESim软件建立水下采油树地面测试单元液压控制系统模型,对模型进行仿真分析。结果表明,所设计的液压控制系统具有良好的控制性和稳定性。
The test of subsea tree can provide a reference for its maintenance. A ground test unit hydraulic control system for subsea trees was designed according to the principal parameters of subsea tree control system and subsea tree test procedures. It contained fluid reservoir, high pressure pump circuit, water pump circuit, accumulators, pressure regulating circuit, interface circuit and return cir?cuit. Then the main parameters of the hydraulic system key components were calculated, based on the principal parameters of subsea tree control system and subsea tree test requirements. AMESim was used for modeling and simulation of the ground test unit hydraulic control system. Through the analysis of simulation results, it is proved that the test unit can provide stable hydraulic fluid and it has a good con?trol effect.
出处
《机床与液压》
北大核心
2016年第2期67-71,共5页
Machine Tool & Hydraulics
基金
国家自然科学基金资助项目(51309240)
教育部博士点基金资助项目(20130133120007)
青岛市科技发展计划资助项目(14-2-4-68-jch)
黄岛区重点科技发展计划资助项目(2014-1-48)
关键词
水下采油树
测试单元
液压控制系统
建模仿真
Subsea tree
Test unit
Hydraulic control system
Modeling and simulation
