摘要
反应堆压力容器(RPV)作为反应堆寿期内不可更换的核心设备,是防止堆芯放射性泄漏的最主要屏障。本文针对国产压力容器材料A508-3钢,开展了一定剂量水平(约10×1019 cm-2,E≥1 MeV)的研究堆加速辐照试验,并进行了辐照后力学性能测试分析,包括拉伸性能和冲击性能测试。结果显示,辐照后在-100、20、288℃下,A508-3钢的屈服强度分别增加了83、108、52 MPa,抗拉强度分别增加了58、61、49 MPa,韧脆转变温度T41J增加了68℃,上平台能量降低了61J。A508-3钢辐照前后性能测试结果表明,在中子辐照至60a寿期后,A508-3钢仍能满足反应堆使用要求。
Reactor pressure vessel (RPV) is the critical un-changeable component of the reactor during its service lifetime, which prevents the radioactive leak of the nuclear power plant core. The irradiation test (about 10×1019 cm-2, E≥1MeV) of the pres- sure vessel material of China A508-3 steel in research reactor was carried out, and the mechanics performance tests were carried out after the neutron irradiation, including tensile property and impact property. The results show that the yield strength increases by 83, 108 and 52 MPa, and the tensile strength increases by 58, 61 and 49 MPa at --100, Z0 and 288℃, respectively. The ductile-brittle transition temperature Z41J increases by 68℃, and the upper shelf energy decreases by 61 J. Meanwhile, by compa- ring the property of un-irradiated and irradiated material, after irradiated to the level of 60 a service life, A508-3 steel still meets the reactor operation requirement.
出处
《原子能科学技术》
EI
CAS
CSCD
北大核心
2016年第2期204-207,共4页
Atomic Energy Science and Technology
基金
国家科技重大专项资助项目(2011ZX06004-002)
国家重点基础研究发展计划资助项目(2011CB610503)
关键词
A508-3钢
中子辐照
辐照脆化
A508-3 steel
neutron irradiation
irradiation embrittlement