摘要
对动力驱动系统单体18650锂电池采用大电流和小电流的恒流放电方式,放电截止电压为3.0V。通过对比小电流和大电流的放电曲线,可知采用小电流放电达到截止电压需要的时间较长,而放电深度大;采用大电流放电达到截止电压需要的时间很短,而放电深度比较小。记录下单体18650锂电池的端电压、容量和时间,通过相关的数据分析,得出以0.5C倍率的电流对单体18650电池进行放电,放电效率最佳。
Power drive 18650 lithium monomer systems with large current and low current mode constant current discharge mode, discharge cut-off voltage is 3.0V. By comparing the discharge curves of low current and high current, a low current discharge requires a long time to reach the cutoff voltage, while a large depth of discharge; a large current discharge requires to reach the cut-off voltage is very short, and the depth of discharge is relatively shallow. Record 18650 lithium monomer terminal voltages, capacity and time, through the relevant data analysis, At a current rate of 0.5C discharge 18650 lithium monomer the battery, the discharge efficiency is the best.
出处
《中国农机化学报》
2016年第3期172-176,共5页
Journal of Chinese Agricultural Mechanization
基金
河南省高校科技创新人才支持计划项目(2012HSTIT015)
河南省烟草公司资助项目--专用烟草农业机械电动化系列开发
关键词
18650锂电池
放电特性
放电时间
放电深度
C-I-U-T关系
18650 lithium battery
discharge characteristics
discharge time
discharge depth
relationships between C-I-U-T