1AnkurRaval, AnimeshChoubey, Chhaya Engineer, et al.Developmenl and assessment of 316LUM cardiovascular stents[J]. Materials Science and Engineering, 2004 ( 386 ) : 331-343.
2Balcon R, Beyar R, Chiemhia S, et al. Recommendafions on sfent manufacture, implantalion and utilization. Study Group of the Working Group on Coronary Circalarian[J]. Eur Heart J, 1997, 18 ( 10 ) : 1536-1547.
1British Standard: BS En14299:Non active surgical implantspaticular requirements for cardiac and vascular implantsspecific requirements for arterial stents. 2004 : 1 2.
2US FDA. The guidance for industry and FDA staff: Nonclinical Tests and Recommended Labeling for Intravascular Stents and Associated Delivery Systems. 2005 : 14-19.
3Migliavacca F, Petrini L, Montanari V, et aL A predictive study of the mechanical behaviour of coronan/ stents by computer modeling [ J ]. Med Eng Phys, 2005,27 (1 ) : 13- 18.
4De Beule M, Van Impe R, Verhegghe B, et al. Verdonck. Finite element analysis and stent design: Reduction of dogboning[ J]. Technol Health Care,2006, 14(4-5) :233-241.
5Takashima T, Kitou T, Mori K, et al. Simulation and experimental observation of contact conditions between stents and artery models[J]. Med Eng Phys,2007,29(3) :326-335.
6Holzapfel G A, Stadler M, Gasser T C. Changes in the mechanical environment of stenotic arteries during interaction with stents: computational assessment of parametric stent designs[J]. J Biomech Eng,2005,127(1 ):166-180.
7Dumoulin C, Cochelin B. Mechanical Behaviour Modelling of Balloon-Expandable Stents [ J ]. Journal of Biomechanics, 2000,33 : 1461-1470.
8Lau KW, Sigwart U. Intracoronary stents[J]. Indian Heart J,1991,43 ;127.
