摘要
在低压大电流开关电源的设计中,由于输出电压比较小,而输出电流又较大,为了解决此问题,通常需要多相并联,在多相交错的DC/DC变换器中,存在着电流分配不均匀的问题,电流分配不均匀,就会使得某相电流过大而损坏,某相电流过小而不能正常的工作。针对这个问题,文章提出了用HIP6303和HIP6602B进行自动均流的技术,并对这种均流方法进行了详细的论述,通过理论和实验,验证了其均流的效果,由此得出该方案的可行性。
In the design of low-voltage high-current switching power supply, due to the relatively small output voltage, and large output current, in order to solve this problem, heterogeneous parallel is usually needed. In multiphase crisscross DC/DC converter, there is a problem of non-uniform current distribution, which will cause too large current in one phase causing damage and too small current in another phase failing to work normally. Aiming at this problem, the paper proposes using the HIP6303 HIP6602 B and automatic flow technology, and the flow method is introduced in detail. Through theory and experiment, its current sharing effect is verified, thus the feasibility of the scheme is obtained.
出处
《价值工程》
2016年第8期226-227,共2页
Value Engineering
