期刊文献+

Effect of Direct Quenching and Partitioning Treatment on Mechanical Properties of a Hot Rolled Strip Steel 被引量:6

Effect of Direct Quenching and Partitioning Treatment on Mechanical Properties of a Hot Rolled Strip Steel
下载PDF
导出
摘要 Three different online heat treatment processes were designed to study the effects on the mechanical properties of a 0.19C-1.6Si-1.6Mn(wt%) hot rolled strip steel.The microstructures were characterized by means of SEM,TEM,EPMA,and XRD.The mechanical properties were estimated by tensile tests.Results showed that a satisfying combination of strength and ductility could be obtained through the ferrite relaxation and direct quenching and partitioning process.Analysis was also focused on this process.The microstructure contained proeutectoid ferrite grains,martensite packets and blocky or interlath retained austenite,and also contained carbide-free bainite in the case of relatively high quench temperatures.The retained austenite fraction was increased through proeutectoid ferrite and partial bainite transformation,while the tensile strength was also consequently decreased.The most of retained austenite transformed to ferrite under deformation and the elongation was obviously improved. Three different online heat treatment processes were designed to study the effects on the mechanical properties of a 0.19C-1.6Si-1.6Mn(wt%) hot rolled strip steel.The microstructures were characterized by means of SEM,TEM,EPMA,and XRD.The mechanical properties were estimated by tensile tests.Results showed that a satisfying combination of strength and ductility could be obtained through the ferrite relaxation and direct quenching and partitioning process.Analysis was also focused on this process.The microstructure contained proeutectoid ferrite grains,martensite packets and blocky or interlath retained austenite,and also contained carbide-free bainite in the case of relatively high quench temperatures.The retained austenite fraction was increased through proeutectoid ferrite and partial bainite transformation,while the tensile strength was also consequently decreased.The most of retained austenite transformed to ferrite under deformation and the elongation was obviously improved.
出处 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS 2016年第1期178-185,共8页 武汉理工大学学报(材料科学英文版)
基金 Funded by the National Basic Research Program of China(No.51504063) the Natural Science Foundation of Liaoning Province of China(No.2014020027) the Fundamental Research Funds for the Central Universities(No.N130407001)
关键词 hot strip steel relaxation quenching and partitioning retained austenite mechanical properties hot strip steel relaxation quenching and partitioning retained austenite mechanical properties
  • 相关文献

参考文献1

二级参考文献34

  • 1Speich G R, Demarest V A, Miller R L. Metall Trans, 1981; 12A: 1419.
  • 2Takashi F, Hirofumi M, Michio E, Hiroshi T, Kazuo K, Osamu A, Teruaki Y. Trans ISIJ, 1981; 21:812.
  • 3Matsumura O, SakumaY, Takechi H. Scr Metall, 1987; 21: 1301.
  • 4Matsumura O, SakumaY, Takechi H. ISIJ Int, 1992; 32: 1014.
  • 5Sugimoto K, Misu M, Kobayashi M, Shirasawa H. ISIJ Int, 1993; 33:775.
  • 6Speer J G, Matlock D K, De Cooman B C, Schroth J G. Acta Mater, 2003; 51:2611.
  • 7Speer J G, Edmonds D V, Rizzo F C, Matlock D K. Curt Opin Solid State Mater Sci, 2004; 8:219.
  • 8Edmonds D V, He K, Rizzo F C, De Cooman B C, Matlock D K, Speer J G. Mater Sei Eng, 2006; A438-440:25.
  • 9De Moor E, Lacroix S, Clarke A J, Penning J, Speer J G. Metall Mater Trans, 2008; 39A: 2586.
  • 10Liu H P, Lu X W, Jin X J, Dong H, Shi J. Scr Mater, 2011; 64:749.

共引文献10

同被引文献30

引证文献6

二级引证文献18

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部