期刊文献+

直线电机的二自由度双模糊PID自整定控制器研究 被引量:2

Research of 2-DOF Bi-fuzzy Self-tuning PID Controller for Linear Motor
下载PDF
导出
摘要 直线电机在高精度直线运动场合作为驱动装置时,采用传统的PID控制难以满足精度和动态响应的要求。本文在结合模糊自整定PID控制和二自由度PID控制的基础上,提出了一种新型的基于目标值滤波型二自由度双模糊PID自整定控制器用以满足高精度场合下的直线电机控制。并通过Matlab/Simulink搭建了模型并进行了仿真,仿真结果表明:该控制器相比PID控制和模糊自整定PID控制具有更好的动态性能,具有较小的超调量和较快的响应速度,验证了设计方案的可行性。 Linear motor is generally used as the driving device in high precision situation, but the traditional PID control is difficult to meet the accuracy demand and the dynamic response of the motor. In this paper, based on the combination of fuzzy self-tuning PID control and two degree of freedom PID control, a new PID self-tuning controller with 2-DOF based on target value filtering is proposed. And Matlab/Simulink model has been built to simulate the controller. The simulation result shows that: comparing with traditional PID control and fuzzy self-tuning PID control ,by using this controUer,both the dynamic performance and response speed has been advanced,and the maximum deviation is decreased as well, which verified the feasibility of the design.
作者 程帆 余海涛
机构地区 东南大学
出处 《电气技术》 2016年第2期24-27,共4页 Electrical Engineering
关键词 直线电机 双模糊 PID 二自由度 linear motor bi-fuzzy PID 2-DOF
  • 相关文献

参考文献4

二级参考文献40

  • 1刘军,刘丁,吴浦升,白华煜.基于模糊控制调节电压矢量作用时间策略的永磁同步电机直接转矩控制仿真研究[J].中国电机工程学报,2004,24(10):148-152. 被引量:60
  • 2史涔溦,邱建琪,金孟加,Friedrich W.Fuchs.永磁同步电动机直接转矩控制方法的比较研究[J].中国电机工程学报,2005,25(16):141-146. 被引量:44
  • 3程飞,过学迅,别辉.电动车用永磁同步电机的双模糊控制研究[J].中国电机工程学报,2007,27(18):18-22. 被引量:28
  • 4李耀华,吴彦锐,商蓓,刘卫国,孟彦京.矩阵式变换器电机系统直接转矩控制新方法[J].微特电机,2007,35(7):30-33. 被引量:3
  • 5Mishra S, Coapilen J, Tomizuka M. Precision positioning of wafer scanners - segmented iterative learning control for nonrepetitive disturbances[J]. IEEE Control Systems Magazine, 2007, 27(4): 20-25.
  • 6Huang W, Liu C, Hsu P, et al. Precision control and compensation of servomotors and machine tools via the disturbance observer[J]. IEEE Transactions on Industrial Electronics, 2010, 57(1): 420-429.
  • 7Ogata K. Modem control engineering[M]. 4 ed. Beijing: Tsinghua University Press, 2006. 705-709.
  • 8Masory O. Improving controuring accuracy of NC/CNC systems with additional velocity feed forward loop [J]. Journal of Engineering for Industry, 1986, 108(3): 227-230.
  • 9Chen C S, Lee A C. New direct velocity and acceleration feedforward tracking control in a retrofitted milling machine[J]. International Journal of The Japan Society for Precision Engineering, 1999, 33(3): 178-184.
  • 10Tomizuka M. Zero phase error tracking algorithm for digital-control[J] Journal of Dynamic Systems Measurement and Control-Transactions of the Asme, 1987, 109(1): 65-68.

共引文献32

同被引文献16

引证文献2

二级引证文献16

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部