摘要
Adsorption is the most widely used technology for the removal of indoor volatile organic compounds （VOCs）. However, existing adsorbent-based technologies are inadequate to meet the regulatory requirement, due to their limited adsorption capacity and efficiency, especially under high relative humidity （RH） conditions. In this study, a series of new porous clay heterostructure （PCH） adsorbents with various ratios ofmicropores to mesopores were synthesized, characterized and tested for the adsorp- tion of acetaldehyde and toluene. Two of them, PCH25 and PCH50, exhibited markedly improved adsorption capabil- ity, especially for hydrophilic acetaldehyde. The improved adsorption was attributed to their large micropore areas and high micropore-to-mesopore volume ratios. The amount of acetaldehyde adsorbed onto PCH25 at equilibrium reached 62.7 mg. g-l, eight times as much as the amount adsorbed onto conventional activated carbon （AC）. Even at a high RH of 80%, PCH25 removed seven and four times more of the acetaldehyde than AC and the unmodified raw PCHs did, respectively. This new PCH optimized for their high adsorption and resistance to humidity has promising applications as a cost-effective adsorbent for indoor air purification.
Adsorption is the most widely used technology for the removal of indoor volatile organic compounds （VOCs）. However, existing adsorbent-based technologies are inadequate to meet the regulatory requirement, due to their limited adsorption capacity and efficiency, especially under high relative humidity （RH） conditions. In this study, a series of new porous clay heterostructure （PCH） adsorbents with various ratios ofmicropores to mesopores were synthesized, characterized and tested for the adsorp- tion of acetaldehyde and toluene. Two of them, PCH25 and PCH50, exhibited markedly improved adsorption capabil- ity, especially for hydrophilic acetaldehyde. The improved adsorption was attributed to their large micropore areas and high micropore-to-mesopore volume ratios. The amount of acetaldehyde adsorbed onto PCH25 at equilibrium reached 62.7 mg. g-l, eight times as much as the amount adsorbed onto conventional activated carbon （AC）. Even at a high RH of 80%, PCH25 removed seven and four times more of the acetaldehyde than AC and the unmodified raw PCHs did, respectively. This new PCH optimized for their high adsorption and resistance to humidity has promising applications as a cost-effective adsorbent for indoor air purification.
