摘要
铜始极片的耳片制作采用"拉耳穿棒技术",传统的加工方法不能满足镍耳片的成形质量要求,为此设计了专用弯耳送耳机。弯耳送耳机主要由耳片输送单元、耳片处理单元、机械手、门架等部分组成。成形后的镍片通过机械手夹持进入下一工序,不仅减少了耳片成形后的回弹作用,保证了产品质量,而且减少了工人劳动强度及人工操作造成的误差,大大提高了生产效率。
The lug of copper starting sheet is prepared using the"lug pulling and bar-threading technology". Traditional processing method fails to meet the requirement on the nickel sheet forming quality,so that the dedicated lug bending conveying machine is designed,which is composed of the lug conveying unit,lug handling unit,manipulor,portal,etc.The formed nickel sheet is clamped by the mechanical arm to enter the next procedure,which can decrease any springback action of the formed lug,guarantee the product quality,and reduce workers' labor intensity and any error caused by manual operation,greatly improving the production efficiency.
出处
《起重运输机械》
2016年第3期15-17,共3页
Hoisting and Conveying Machinery
关键词
镍始极片
弯耳送耳机
机器手
设计
nickel starting sheet
bending machine
manipulor
design