期刊文献+

Induced Plasticity of a Brittle(La,Ce)-Based Bulk Metallic Glass by Surface Corrosion 被引量:1

Induced Plasticity of a Brittle(La,Ce)-Based Bulk Metallic Glass by Surface Corrosion
原文传递
导出
摘要 Unexpected facture without any room-temperature plasticity severely limits potential structural applications of bulk metallic glasses (BMGs), especially La-, Mg- and Fe-based ones. In this study, a simple free corrosion method was provided to improve the plasticity of a brittle (La, Ce)-based BMG by the introduction of high-density corrosion defects on the surface. The influences of immersing time in 0.1 mol/L H2SO4 aqueous solution on the surface morphology and mechanical properties of the BMG were evaluated. With increasing immersing time from 5 to 30 min, the degree of surface corrosion increased obviously, and the distribution of corrosion defects became more homogenous. In the samples, the yielding phenomenon and certain plasticity appeared up to 0.3% after the surface treatment. The yielding and plasticity can be attributed to easier nucleation of shear bands on the defect surface rather than on the glabrous surface. The results provided a novel method to improve the plasticity of BMGs. Unexpected facture without any room-temperature plasticity severely limits potential structural applications of bulk metallic glasses (BMGs), especially La-, Mg- and Fe-based ones. In this study, a simple free corrosion method was provided to improve the plasticity of a brittle (La, Ce)-based BMG by the introduction of high-density corrosion defects on the surface. The influences of immersing time in 0.1 mol/L H2SO4 aqueous solution on the surface morphology and mechanical properties of the BMG were evaluated. With increasing immersing time from 5 to 30 min, the degree of surface corrosion increased obviously, and the distribution of corrosion defects became more homogenous. In the samples, the yielding phenomenon and certain plasticity appeared up to 0.3% after the surface treatment. The yielding and plasticity can be attributed to easier nucleation of shear bands on the defect surface rather than on the glabrous surface. The results provided a novel method to improve the plasticity of BMGs.
出处 《Acta Metallurgica Sinica(English Letters)》 SCIE EI CAS CSCD 2016年第2期129-133,共5页 金属学报(英文版)
基金 financially supported by the National Natural Science Foundation of China(Nos.51131002 and51301196) the Fok Ying-Tong Education Foundation for Young Teachers in the Higher Education Institutions of China(No.142008) the Fundamental Research Funds for the Central Universities(No.YWF-15-CLXY-002) the Scientific Research Foundation for the Returned Overseas Chinese Scholars of State Education Ministry
关键词 Metallic glasses Corrosion plastic deformation mechanism Rapid solidification MICROSTRUCTURE Metallic glasses Corrosion plastic deformation mechanism Rapid solidification Microstructure
  • 相关文献

参考文献25

  • 1A. Inoue, Acta Mater. 48, 279 (2000).
  • 2M.F. Ashby, A.L. Greet, Scr. Mater. 54, 321 (2006).
  • 3W.L. Johnson, JOM 54, 40 (2002).
  • 4C.A. Schuh, T.C. Hufnagel, U. Ramamurty, Acta Mater. 55, 4067 (2007).
  • 5J. Wang, R. Li, N. Hua, T. Zhang, L Mater. Res. 26, 2072 (2011).
  • 6O. Pelin, H. Aytekin, Acta Metall. Sin. (Engl. Lett.) 28, 733 (2015).
  • 7A.L. Greer, Y.Q. Cheng, E. Ma, Mater. Sci. Eng. R 74, 71 (2013).
  • 8L. Zhang, R. Li, T. Xu, H. Zhang, T. Zhang, Intermetallics 52, 92 (2014).
  • 9J.W. Qiao, M.M. Meng, Z.H. Wang, C.J. Huang, R. Li, Y.S. Wang, H.J. Yang, Y. Zhang, L.F. LiuiP Adv. 4, 107 (2014).
  • 10T.G. Nieh, Y. Yang, J. Lu, C.T. Liu, Prog. Nat. Sci. 22, 355 (2012).

同被引文献15

引证文献1

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部