Removal of trace Cr(VI) from water using chitosan-iron nanowires in porous anodic alumina

Chitosan-iron nanowires in porous anodic alumina(PAA) have been successfully prepared under ambient conditions as an adsorbent. The adsorbent was characterized by scanning electron microscopy, X-ray photoelectron spectroscopy and N_2-BET surface area. The results showed that PAA can disperse and protect Fe^0 nanorods from oxidation. The adsorption characteristics of trace Cr(VI) onto adsorbent have been examined at different initial Cr(VI) concentrations with pH 5. Batch adsorption studies show that the removal percentage of adsorbent for the removal of trace Cr(VI) is strongly dependent on the initial Cr(VI) concentrations. Langmuir and Freundlich isotherm models were used to analyze the experiment data. The adsorption of trace Cr(VI) by adsorbent is well modeled by the Langmuir isotherm and the maximum adsorption capacity of Cr(VI) is calculated as 123.95 mg/g which is very closed to the experiment results. Intraparticle diffusion study shows that the intraparticle diffusion of adsorbent is not the sole rate-controlling step. The negative value of Gibbs free energy change, DG^0, indicated that the process of Cr(VI) onto adsorbent was spontaneous. This work has demonstrated that chitosan-iron nanowires in porous anodic alumina as an adsorbent has promising potential for heavy metal removal at trace level.

Chitosan-iron nanowires in porous anodic alumina （PAA） have been successfully prepared under ambient conditions as an ad- sorbent. The adsorbent was characterized by scanning electron microscopy, X-ray photoelectron spectroscopy and N2-BET surface area. The results showed that PAA can disperse and protect Fe0 nanorods from oxidation. The adsorption characteris- tics of trace Cr（VI） onto adsorbent have been examined at different initial Cr（VI） concentrations with pH 5. Batch adsorption studies show that the removal percentage of adsorbent for the removal of trace Cr（VI） is strongly dependent on the initial Cr（VI） concentrations. Langmuir and Freundlich isotherm models were used to analyze the experiment data. The adsorption of trace Cr（VI） by adsorbent is well modeled by the Langmuir isotherm and the maximum adsorption capacity of Cr（VI） is calcu- lated as 123.95 mg/g which is very closed to the experiment results. Intraparticle diffusion study shows that the intraparticle diffusion of adsorbent is not the sole rate-controlling step. The negative value of Gibbs free energy change,△G0, indicated that the process of Cr（VI） onto adsorbent was spontaneous. This work has demonstrated that chitosan-iron nanowires in porous anodic alumina as an adsorbent has promising potential for heavy metal removal at trace level.