摘要
Single off-gas outlet devised by one-step COREX shaft furnace will ultimately lead gas distribution to segregate,furthermore the distribution of powder on charge level is non-uniformity.DPM-CFD model was employed to simulate the pellet minus sieve powder motion in the burden distribution process,in order to quantitative description the non-uniformity distribution.The results showed that,the non-uniformity distribution is increasing with the melting rate increased.The powder segregates to the fourth quadrant where off-gas outlet lies is 2.4 or 2.5 fold of any other quadrant,while the melting rate is 130 t/h or 180 t/h.The best method to resolved the problem adds an symmetry off-gas outlet.
Single off-gas outlet devised by one-step COREX shaft furnace will ultimately lead gas distribution to segregate,furthermore the distribution of powder on charge level is non-uniformity.DPM-CFD model was employed to simulate the pellet minus sieve powder motion in the burden distribution process,in order to quantitative description the non-uniformity distribution.The results showed that,the non-uniformity distribution is increasing with the melting rate increased.The powder segregates to the fourth quadrant where off-gas outlet lies is 2.4 or 2.5 fold of any other quadrant,while the melting rate is 130 t/h or 180 t/h.The best method to resolved the problem adds an symmetry off-gas outlet.
作者
XU Hui~(1)),LI Jian~(1)),WU Shengli~(1)) and LIN Jinjia~(2)) 1) Research Institute,Baoshan Iron & Steel Co.,Ltd.,Shanghai 201900,China 2) Ironmaking Plant,Baoshan Iron & Steel Co.,Ltd.,Shanghai 201900,China
