摘要
Improving the unit heat efficiency,reducing coal consumption and the emission of CO_2 and meeting the requirements of environmental protection and energy conservation is the goal of the boiler and the power industry.Developments of large capacity and high parameter ultra-supercritical(USC) units are the tendency of the power industry.There is no doubt that the development of USC units is based on the development of materials, especially the materials used for super-heater and reheater in high-temperature USC boiler.Due to the long time exposure to the harsh environment,such as bearing the 600℃steam oxidation,and withstanding the corrosive flue gas and fly ash erosion,the materials require not only good high-temperature strength,but also a good corrosion resistance.In consideration of the requirements cited above,foreign countries had developed TP310HCbN (07Cr25Ni21CbN) austenitic heat-resistant steel.However,the domestic demands for this material still depend on import and the cost is high,so the boiler and the power industry expects eagerly that these steels can be produced by domestic metallurgical industry,especially Baosteel,to replace the imported products.In order to satisfy the requirements of domestic manufacturing super-heater and reheater used in ultra-supercritical power boiler,after developed T23、T91、T92、S30432 high pressure boiler tube,Baosteel began to develop TP310HCbN (07Cr25Ni21CbN)austenitic stainless steel tube in January of 2007.This study describes the composition design, the manufacturing process of product,and the assessment of performance of Baosteel's TP310HCbN (07Cr25Ni21CbN).The data indicates that properties of Baosteel's TP310HCbN(07Cr25Ni21CbN) conform to the ASME SA-213 standard and GB5310 standard,so it can substitute the imported products and is suitable for manufacturing power station boiler of great capacity and high steam parameters.
Improving the unit heat efficiency,reducing coal consumption and the emission of CO_2 and meeting the requirements of environmental protection and energy conservation is the goal of the boiler and the power industry.Developments of large capacity and high parameter ultra-supercritical(USC) units are the tendency of the power industry.There is no doubt that the development of USC units is based on the development of materials, especially the materials used for super-heater and reheater in high-temperature USC boiler.Due to the long time exposure to the harsh environment,such as bearing the 600℃steam oxidation,and withstanding the corrosive flue gas and fly ash erosion,the materials require not only good high-temperature strength,but also a good corrosion resistance.In consideration of the requirements cited above,foreign countries had developed TP310HCbN (07Cr25Ni21CbN) austenitic heat-resistant steel.However,the domestic demands for this material still depend on import and the cost is high,so the boiler and the power industry expects eagerly that these steels can be produced by domestic metallurgical industry,especially Baosteel,to replace the imported products.In order to satisfy the requirements of domestic manufacturing super-heater and reheater used in ultra-supercritical power boiler,after developed T23、T91、T92、S30432 high pressure boiler tube,Baosteel began to develop TP310HCbN (07Cr25Ni21CbN)austenitic stainless steel tube in January of 2007.This study describes the composition design, the manufacturing process of product,and the assessment of performance of Baosteel's TP310HCbN (07Cr25Ni21CbN).The data indicates that properties of Baosteel's TP310HCbN(07Cr25Ni21CbN) conform to the ASME SA-213 standard and GB5310 standard,so it can substitute the imported products and is suitable for manufacturing power station boiler of great capacity and high steam parameters.
作者
WANG Qijiang~(1)),ZHU Changchun~(1)) and HONG Jie~(1)) 1) Baosteel Iron &Steel Co.,Ltd.,Research Institute,Baoshan Iron & Steel Co.,Ltd.,Shanghai 201900,China 2) Special Steel Business Unit,Baosteel Iron & Steel Co.,Ltd.,Shanghai 200940,China
