期刊文献+

炼油企业延迟焦化系统碳素流分析及碳减排研究 被引量:2

Carbon Flow Analysis and Carbon Reduction of Delayed Cooking System in Oil Refinery Enterprise
下载PDF
导出
摘要 采用元素流分析方法,对炼油企业延迟焦化系统的碳素流规律及影响碳排放的主要因素进行了研究。建立了延迟焦化系统的碳素流模型,定义了碳素流评价指标,以调研数据为案例,跟踪评价了预加热子工序、延迟焦化子工序及产品分馏子工序碳元素的流动过程,并运用数学规划方法对燃料消耗量、加热炉燃烧效率、过量空气系数及燃料碳氢质量比4个变量进行了优化分析。结果表明,预加热子工序是延迟焦化系统中碳排放的主要工序,约占总碳排放量的63.13%,影响预加热子工序碳排放量的主要因素是燃料消耗量和燃料碳氢质量比。 The carbon flow model was established based on Substance Flow Analysis(SFA)and the factors that cause the carbon emission were analysis by mathematical programming.The evaluation indicators were defined in order to evaluate the carbon flowing of TDCS.The results show that the main form of carbon emission is the carbon gases discharged to the environment for TDCS.The main sub-process of carbon emission is the pre-heating sub-process.And the carbon emission increases with the increasing of fuel consumption and C/H ratio,which influence the carbon emission most.
出处 《辽宁石油化工大学学报》 CAS 2016年第1期1-6,共6页 Journal of Liaoning Petrochemical University
基金 国家自然科学基金项目(71373003) 辽宁省教育厅高等学校科学研究一般项目(L2014146) 辽宁石油化工大学大学生创新创业训练项目(2015036)
关键词 碳素流 延迟焦化系统 CO2排放量 炼油企业 碳平衡 Carbon flowing Delayed cooking system Carbon emission reduction Oil refinery enterprise Carbon balance
  • 相关文献

参考文献15

  • 1侯芙生.中国炼油技术[M].3版.北京:中国石化出版社,2011:276-281.
  • 2黄新龙,王洪彬,张瑞风,李和杰.重油浅度热裂化反应深度对延迟焦化过程的影响[J].石油炼制与化工,2014,45(3):25-29. 被引量:9
  • 3Huang C L, Vause J, Ma H W, et al. Using material/substance flowanalysis to support sustainable development assessment : A literature reviewand outlookFJ~. Resour. Conserv. Recyci. ,2012, 68 : 104-116.
  • 4Brunner P H, Rechberger H. Practical handbook of material flow analysis[M~. Florida~ Lewis Publishers, 2004:15-20.
  • 5Heinz S, James W. Material flows and material productivityin China, Australia, and Japan[J]. Journal of Industrial Ecology,2012, 16:352-364.
  • 6Thomas O, Cadmium L. Materials flow in the United States in 1994 [EB/OL2.E2015-09-20~. http=//pubs, usgs. gov/ usbmic/ic-9380/cadmium.pdf.
  • 7Jozef P. Cadmium recycling in the United States in 2003~EB/OI.~ .[2015-08-201. http://pubs, usgs. gov/circ/c1196o/ c1196o.pdf.
  • 8Ester V V. Substance flow analysis of heavy metals" recycling-how to deal with decreasing marketsEEB/OL~.[2015-09- 201. www.leidenuniv.nl/cml/ssp/publications/2000_014, pdf.
  • 9Xu W Q, Cao W J, Zhu T Y, et al. Material flow analysis of C()2 emissions from blast furnace and basic oxygen furnace steelmaking systems in China[J].Steel Research International,2015,86(9):1063-1072.
  • 10Lgarashi Y, Daigo I, Matsuno Y, et al. Dynamic material flow analysis for stainless steels in Japan reductions potential of CO2 emissions by promoting closed loop recycling of stainless steels[J]. ISIJ International, 2007,47 (5):758-763.

二级参考文献38

共引文献100

同被引文献28

引证文献2

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部