期刊文献+

基于设计知识服务的内燃机低摩擦集成设计方法及实现 被引量:1

Low Friction Integrated Design Method for Internal Combustion Engines Based on Design Knowledge Service
原文传递
导出
摘要 低摩擦设计是实现内燃机节能减排的重要途径。为了得到总体优化的低摩擦设计方案,需要在设计过程中集成来自主机厂、零部件厂、摩擦学研究单位等不同组织的多学科专业知识。知识服务是打通不同组织间信息壁垒的最佳途径。为支持基于知识服务的低摩擦设计过程,本研究提出了非实时知识服务和实时在线计算知识服务的实现方法和过程。上述方法将对内燃机低摩擦设计过程中知识服务的高效开展提供支持,有助于缩短产品设计周期、节约设计成本。 Low friction design is an important way to achieve the energy saving and emission reduction of internal combustion engine. To obtain the global optimal low friction design,the designers need to integrate the multidisciplinary specialized knowledge from the main engine factories,part factories,institutes of tribology and so on.Knowledge service is the best way to get through the information barriers between different organizations. In order to support the low friction design based on design service,this research presents the implementation method and process of the non-real-time knowledge service and the real-time calculating knowledge service. The above method efficiently supports the knowledge service in the engine low friction design process and is helpful to shorten the product design cycle and save the design cost.
出处 《机械设计与研究》 CSCD 北大核心 2016年第2期1-5,共5页 Machine Design And Research
基金 国家自然科学基金资助项目(51375300) 机械系统与振动国家重点实验室基金项目(MSVZD201401)
关键词 知识服务 低摩擦 集成设计 内燃机 knowledge service low friction integrated design internal combustion engine
  • 相关文献

参考文献20

  • 1胡锦涛.党的十七大报告.高举中国特色社会主义伟大旗帜为夺取全面建设小康社会新胜利而奋斗[R].2007.
  • 2Richardson D. Review of power cylinder friction for diesel engines [J]. Journal of engineering for gas turbines and power, 2000, 122 (4) : 506 -519.
  • 3谢友柏.摩擦学的三个公理[J].摩擦学学报,2001,21(3):161-166. 被引量:112
  • 4Meng X, Xie Y. Design decomposition /or cross-organizational as- slgnment of design tasks [ J]. Concurrent Engineering, 2010, 18 (2): 111-119.
  • 5谢友柏.现代设计理论和方法的研究[J].机械工程学报,2004,40(4):1-9. 被引量:118
  • 6Liu H, Lv M. Muhidisciplinary integrated knowledge modeling of complex product design[ J]. International Journal of Online Engi- neering, 2013, 9(SPL. ISSUFA) : 45-48.
  • 7Barbieri G, Fantuzzi C, Borsari R. A model-based design methodol- ogy for the development of mechatronic systems[ J]. Mechatronics, 2014, 24(7) : 833 -843.
  • 8Guo Z, Chen X, Wang Z. Multi-discipline collaborative design and simulation environment of spacecraft [ C ]//Systems and Control in Aeronautics and Astronautics (ISSCAA), 2010 3rd International Symposium on. IEEE, 2010:1208 - 1211.
  • 9Monell D W, Piland W M. Aerospace systems design in NASA's collaborative engineering environment [ J ]. Aeta Astronautica, 2000, 47(2) : 255 -264.
  • 10陈小安,尹佑盛,郑小光,梁锡昌,王永刚.分布式协同设计技术及其模型实例设计[J].机械工程学报,2000,36(4):1-4. 被引量:31

二级参考文献72

共引文献273

同被引文献6

引证文献1

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部