期刊文献+

PFC^(2D)数值计算模型微观参数确定方法 被引量:21

Method to Determine Microscopic Parameters of PFC^(2D) Numerical Model
下载PDF
导出
摘要 针对目前应用"试错法"来确定PFC2D数值计算模型微观参数所存在的盲目性问题,提出一种基于物理试验响应的参数确定方法.通过模拟具体对象的基本特性计算模型物理几何参数,借助物理试验响应反演计算颗粒间的接触本构参数.以焦家金矿-450中段下盘糜棱岩为例,在单轴抗压物理试验的基础上,确定相应的数值计算模型微观参数并进行单轴、双轴模拟试验,模拟结果与物理试验具有良好的一致性,验证了微观参数确定方法的可靠性和适用性.PFC2D微观参数确定方法能够在保证精确模拟的基础上,大大降低前期建模工作量,为类似研究提供借鉴. Due to the blindness of the current "trial and error method"used in determining the microscopic parameters in the PFC2 D,a microscopic parameters determination method was put forward based on physical experiments. The physical and geometrical parameters of the simulation model were obtained by simulating the basic characteristics of real samples,and the contact constitutive parameters between particles were back calculated base on the physical test responses.Taking the mylonite of-450 level footwall in Jiaojia gold mine as an example, the micro parameters of the corresponding numerical model were determined,and uniaxial and biaxial simulation were carried out based on the uniaxial compressive physical test. The simulation results and physical responses have good consistency,which verifies the reliability and applicability of the proposed method. The PFC2 Dmicrocosmic parameters determination method can ensure simulation accuracy,reduce the early modeling workload and offer references for similar researches.
出处 《东北大学学报(自然科学版)》 EI CAS CSCD 北大核心 2016年第4期563-567,共5页 Journal of Northeastern University(Natural Science)
基金 国家自然科学基金资助项目(51204031 51274055) 国家科技支撑计划项目(2013BAB02B03) 中央高校基本科研业务费专项资金资助项目(N130401007)
关键词 PEC2D 数值模拟 微观参数确定 试错法 反演计算 PFC2D numerical simulation microscopic parameter determination trial and error method back calculation
  • 相关文献

参考文献3

二级参考文献29

  • 1梁正召,杨天鸿,唐春安,张娟霞,唐世斌,于庆磊.非均匀性岩石破坏过程的三维损伤软化模型与数值模拟[J].岩土工程学报,2005,27(12):1447-1452. 被引量:23
  • 2李术才,李廷春,王刚,白世伟.单轴压缩作用下内置裂隙扩展的CT扫描试验[J].岩石力学与工程学报,2007,26(3):484-492. 被引量:71
  • 3杨圣奇,温森,李良权.不同围压下断续预制裂纹粗晶大理岩变形和强度特性的试验研究[J].岩石力学与工程学报,2007,26(8):1572-1587. 被引量:58
  • 4Sheng-Qi Yang.Crack coalescence behavior of brittle sandstone samples containing two coplanar fissures in the process of deformation failure[J]. Engineering Fracture Mechanics . 2011 (17)
  • 5Heekwang Lee,Seokwon Jeon.An experimental and numerical study of fracture coalescence in pre-cracked specimens under uniaxial compression[J]. International Journal of Solids and Structures . 2010 (6)
  • 6C.H. Park,A. Bobet.Crack initiation, propagation and coalescence from frictional flaws in uniaxial compression[J]. Engineering Fracture Mechanics . 2010 (14)
  • 7S.Q. Yang,Y.H. Dai,L.J. Han,Z.Q. Jin.Experimental study on mechanical behavior of brittle marble samples containing different flaws under uniaxial compression[J]. Engineering Fracture Mechanics . 2009 (12)
  • 8C.H. Park,A. Bobet.Crack coalescence in specimens with open and closed flaws: A comparison[J]. International Journal of Rock Mechanics and Mining Sciences . 2009 (5)
  • 9L. N. Y. Wong,H. H. Einstein.Crack Coalescence in Molded Gypsum and Carrara Marble: Part 1. Macroscopic Observations and Interpretation[J]. Rock Mechanics and Rock Engineering . 2009 (3)
  • 10L. N. Y. Wong,H. H. Einstein.Crack Coalescence in Molded Gypsum and Carrara Marble: Part 2—Microscopic Observations and Interpretation[J]. Rock Mechanics and Rock Engineering . 2009 (3)

共引文献64

同被引文献244

引证文献21

二级引证文献71

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部