期刊文献+

径向轴向联合定位电磁轴承自回复特性分析

Research on the self-restoring characteristics of radial-thrus magnetic bearing
下载PDF
导出
摘要 以用于圆盘转子的径向轴向联合定位电磁轴承为研究对象,分析了在转子受到扰动偏离平衡位置后的电磁轴承的回复特性.结果表明,在沿轴向偏移的情况下径向电磁轴承将产生回复力,在绕直径偏转情况下径向电磁轴承将产生回复力矩,使盘状转子向其平衡位置移动,具有一定的自回复特性.分析计算了回复力和回复力矩及其刚度特性,结果表明在小范围内,该电磁轴承具有良好的自动回复特性,这对将径向轴向联动定位电磁轴承用于星载有效载荷轴系支撑的研究和应用具有一定的指导意义. This paper takes disk rotor radial magnetic bearing as research object,discusses the self-recovery characteristics when the rotor deviates from equilibrium position under disturbance.The radial magnetic bearing will generate a recovery force while the rotor has a axial offset,and it will generate a recovery moment while the rotor has a rotation,which makes the disk rotor move back to its equilibrium position,so this structure has some self-recovery characteristics.Calculated and analyzed the recovery force,the recovery moment and their stiffness characteristics.The results show that in a small range,the magnetic bearing has good self-recovery characteristics.This result has certain guiding significance to the research and application of the radial magnetic bearing for satellite-based payload.
作者 赵志明
出处 《陕西科技大学学报(自然科学版)》 2016年第2期149-153,共5页 Journal of Shaanxi University of Science & Technology
基金 国家自然科学基金项目(51305246) 陕西省教育厅专项科研计划项目(14JK1107) 陕西科技大学博士科研启动基金项目(BJ13-07)
关键词 径向电磁轴承 自回复特性 回复力 回复力矩 有效载荷 radial magnetic bearing self-recovery characteristics recovery force recovery moment payload
  • 相关文献

参考文献13

二级参考文献70

  • 1祝长生.主动电磁轴承失效后转子坠落在备用轴承过程中的非线性动力学[J].机械工程学报,2006,42(7):196-202. 被引量:8
  • 2张江华,曾佑文,王家素,王素玉,宋宏海.高温超导磁悬浮轴承悬浮力数值分析[J].低温与超导,2007,35(2):125-128. 被引量:4
  • 3Zhang Y, Postrekhin Y, Ma K B,et al. Reaction wheel with HTS bearings for mini-satellite attitude control[J]. Supercond. Sci. Technol., 2002, 15(5): 823-825.
  • 4Siems S O, Canders W R, Walter H, et al. Superconducting magnetic bearings for a 2MW/10kWh class energy storage flywheel system[J]. Supercond. Sci. Technol., 2004, 17(5): S229-S233.
  • 5Moon F C. Superconducting levitation[M]. New York: John Wiley and Sons, 1994.
  • 6Hull J R. Superconducting bearings[J]. Supercond. Sci. Technol., 2000, 13(2): R1-R15.
  • 7Ma K B, Postrekhin Y V, Chu W K. Superconductor and magnet levitation devices[J]. Rev. Sci. Instrum., 2003, 74(12): 4989-5017.
  • 8Waiter H, Bock J, Frohne C, et al. First heavy load bearing for industrial application with shaft loads up to 10 kN[J]. J. Phys. Conf. Ser., 2006, 43:995-998.
  • 9Koshizuka N, Ishikawa F, Nasu H, et al. Present status of R&D on superconducting magnetic bearing technologies for flywheel energy storage system[J]. Physica C, 2002, 378-381(Part 1): 11-17.
  • 10Wang J S, Wang S Y, Zeng Y W, et al. The first man-loading high temperature superconducting Maglev test vehicle in the world[J]. Physica C, 2002, 378-381(Part 1): 809-814.

共引文献76

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部