摘要
采用掺杂的方法合成了Cu-MCM41介孔分子筛,并在选择性催化氧化二甲氧基甲烷合成碳酸二甲酯的过程中评价了其催化效能。详细考察了催化剂制备的晶化时间、装填比例、铜源引入的次序对催化效能的影响。结果表明,晶化时间24h、装填比例60%和TEOS加入1h后引入铜源的条件下制备的Cu-MCM41在选择性催化氧化二甲氧基甲烷合成碳酸二甲酯时具有最佳的催化效果。
Synthesis of dimethyl carbonate(DMC) by Catalytic Oxidation dimethoxymethane(DMM) was studied to evaluate the catalytic properties of Mesoporous molecular sieve Cu-MCM41 prepared by doping method.The effect of crystallizing time,loading ratio and the introduction order of copper source on the catalytic performance was investigated in detail. The results indicated that CuMCM41 has the best catalytic properties on catalytic oxidation DMM to DMC,under the optimized preparation conditions: Crystallizing time 24 h,loading ratio 60%and introduced copper source 1 h after adding TEOS.
出处
《化学研究与应用》
CAS
CSCD
北大核心
2016年第4期455-461,共7页
Chemical Research and Application
基金
2013年河南省科技厅基础研究规划项目(132300410481)资助
2014河南省教育厅人文社会科学研究项目(14B530008)资助
周口师范学院创新基金项目(ZKSYKYCX201304)资助
周口师范学院校本项目(ZKNUB115209)资助
周口师范学院实验室开放项目(K201535)资助
关键词
碳酸二甲酯
二甲氧基甲烷
制备条件
掺杂
介孔分子筛
dimethyl carbonate
dimethoxymethane
preparation condition
doping
mesoporous molecular sieve