期刊文献+

元素Re对选区激光熔化GH4169合金组织与蠕变性能的影响 被引量:1

Influence of Element Re on Microstructure and Creep Behavior of GH4169 Alloy by Selective Laser Melting
下载PDF
导出
摘要 通过热处理、蠕变性能测试和组织形貌观察,研究了稀有元素Re对GH4169合金微观组织及蠕变性能的影响。结果表明:元素Re的添加对γ'相筏状组织起到细化作用,可促使δ相沿晶界析出抑制晶界滑移,可提高合金显微硬度。经过固溶和时效处理后合金组织细化明显,短针状δ相和长条状MC型碳化物减少。在蠕变期间,δ相的数量会影响合金的断裂方式。元素Re的添加可提高合金的高温蠕变性能。 By heat treatment, creep property measurement and microstructure observation, the influence of rare element Re on the microstructure and creep behaviors of GH4169 alloy was investigated. The results show that, rare element Re can refine γ phase tar structure, promote the precipitation of 8 phase distributing along boundaries which can restrain the boundaries slipping and increases the microhardness of the alloy. Atter solution and aging treatment, the microstructure of the alloy obviously refines.The short needle-like 8 phase and long strip MC type carbides decrease. As the creep goes on, the number of 8 phase can affect the failure mode of the alloy. The addition of rare element Re can enhance the high temperature creep behavior of the alloy.
出处 《热加工工艺》 CSCD 北大核心 2016年第8期111-114,共4页 Hot Working Technology
基金 山西省基础研究项目(2013011014-1) 山西省青年科技基金资助项目(2009021028)
关键词 元素 Re GH4169 选区激光熔化 纤维组织 蠕变性能 elements Re GH4169 SLM microstructure creep behaviors
  • 相关文献

参考文献9

  • 1刘斌,白培康,李玉新,李鹏.Fe-Ni系金属粉末选区激光熔化成型工艺研究[J].热加工工艺,2013,42(5):225-227. 被引量:2
  • 2罗子艺,杨永强,卢建斌,王迪.密度梯度零件选区激光熔化制造基础工艺研究[J].热加工工艺,2011,40(1):195-198. 被引量:2
  • 3赵新宝,谷月峰,鲁金涛,严靖博,尹宏飞.GH4169合金的研究新进展[J].稀有金属材料与工程,2015,44(3):768-774. 被引量:54
  • 4Heckl A, Neumeier S, GSken M, et al. Theeffect of Re and Ru on γ/γ microstructure,γ-solid solution strengtheningand creep strength in nickel-base superalloys [J]. Materials Science and Engineering A,2011,528:3435-3444.
  • 5Rao A G, Mahendra K, Srinivas M, et al. Effect of standard heat treatment on the microstructure and mechanical properties of hot isostatically pressed superalloy incone1718[J]. Materials Science and Engineering A,2003,355 : 114-125.
  • 6管秀荣,刘恩泽,纪慧思,郑志,佟健,翟玉春.Re对一种新型镍基高温合金组织稳定性的影响[J].材料科学与工艺,2012,20(3):94-98. 被引量:5
  • 7王岩,邵文柱,曾亮.GH4169合金8相的溶解行为及对变形机制的影响[J].中国机械工程,2004,15(5):434-434.
  • 8Khang M W. Direct metal laser sintering for rapid tooling: processing and characterization of EOS parts [J]. Journal of Material Processing Technology,2001,113 : 162-172.
  • 9田素贵,于幸福,李唐,等.单晶镍基合金的热处理对蠕变性的影响[J].材料工程,2005,16(1):67-73.

二级参考文献41

共引文献59

同被引文献5

引证文献1

二级引证文献7

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部