期刊文献+

新型加氢反应器内构件的工业应用 被引量:3

Industrial application of novel hydrogenation reactor internals
下载PDF
导出
摘要 以焦化蜡油或焦化柴油为原料,对50万t/a焦化蜡油加氢装置的新型反应器内构件(气液分配盘及冷氢系统)的工业应用效果进行了评价。结果表明:以焦化蜡油为原料,采用新型加氢反应器内构件,反应器空间利用率达到82.1%,催化剂床层出入口平均径向温差小于1.5℃,催化剂失活速率为0.030℃/d;装置也同样适用于焦化柴油,即装置对原料的适应性好。 The industrial application effect of the novel hydrogenation reactor internals( including gas- liquid distributor and cold quench system) in a500 kt / a coker gas oil hydrotreating unit was evaluated with coker gas oil or coking diesel as feedstocks. The results showed that after using the novel hydrotreating internals,the utility rate of reactor space reached 82. 1%,the average radial temperature difference of the catalyst bed was less than1. 5 ℃,and the deactivation rate of catalyst was0. 030 ℃ / d. The unit was also suitable for coking diesel,and it had the better adaptability to feedstocks.
出处 《石化技术与应用》 CAS 2016年第3期226-229,共4页 Petrochemical Technology & Application
关键词 焦化蜡油 焦化柴油 加氢反应器 内构件 工业应用 coker gas oil coking diesel hydrogenation reactor internal industrial application
  • 相关文献

参考文献22

  • 1叶文源.加氢反应器结构的初步探讨[J].石油化工设备技术,1981(1):17-23.
  • 2Lamourelle A P, MeKnight J, Douglas E N. Clean fuels:Route to low sulfur low aromatic diesel [ C ]//NPRA Annual Meet- ing. Washington D C:National Petrochemical & Refiners Associa- tiun ,2001 : AM - 01 - 28.
  • 3Salvatnre Torrlsi, Remans T, Svendsen J, et al. Proven best prac- tices for alsd production [ C ]//NPRA Annual Meet- ing. Washington D C:National Petrochemical & Refiners Associa- tion ,2002 : AM - 02 - 35.
  • 4Mehrotra S, Rouby J L, Torrisi S P, et al. Boost your ultra - low sulfur diesel margin[ C ]//NPRA Annual Meeting. Washington D C : National Petrochemical & Refiners Association, 2005 : AM - 05 -41.
  • 5Swain J,Zonnevylle M. Are you really getting the most from your hydroprocessing reactor[ C ]//European Refining Technical Con- ference. Rome : GSTF ,2000.
  • 6中国石油化工股份有限公司.一种抽吸旋流型气液分配器:中国,200420115970.8[P].2004-11-30.
  • 7中国石油化工股份有限公司.一种物流混合分配系统:中国,200710122023.X[P].2007-09-20.
  • 8张龙习.渣油加氢反应器制造的几点特殊技术要求[J].化工装备技术,2015,36(5):56-58. 被引量:1
  • 9赵建华,陈明,刘晓丽,于保宁,李子敬,张彦娟.加氢反应器大型筒体锻造工艺优化[J].大型铸锻件,2015(4):39-40. 被引量:2
  • 10刘农基,聂颍新,陈崇刚,刘恩清,吕志尧,张文辉.广西石化渣油加氢反应器轻量化设计制造[J].压力容器,2015,32(1):25-35. 被引量:15

二级参考文献45

共引文献59

同被引文献23

引证文献3

二级引证文献15

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部