三维激光扫描仪在变形监测中的应用

An Applied Study on the Three-dimensional Laser Scanner Used in the Deformation Monitoring

本文以基坑和隧道为例,分别介绍了三维激光扫描仪在其变形监测中的应用,并结合Geomagic Studio软件对采集的点云数据进行了3D分析。工程实践表明,采用三维激光扫描技术得到的变形监侧结果与实际情况基本一致,其效果甚好。

In this paper, taking the foundation pit and tunnel for an example,The application of the Three-dimensional laser scanner in the deformation monitoring is separately introduced,and Combs with Geomagic Studio software, which carry out the 3D analysis of the collected point- cloud data .Engineering practice indicated that the deformation monitoring results obtained by using Three-dimensional laser scanner technology is basically consistent with the actual situation,and the effect is very good.