摘要
为了给熔炼电子枪设计验证和改进提供理论依据,利用CST粒子工作室对某型熔炼电子枪的电子发生系统进行仿真验证,获得了在加速电压为30kV,阴、阳极曲率半径比值为2.2的电子枪的导流系数、束流形态以及最小束流直径(束腰)。仿真结果与理论计算对比分析表明,二者在误差允许范围内近似相等。
In order to provide theoretical basis for the design verification and improvement of the melting electron gun, the CST particle studio is applied to simulate some type of generating system of melting electron gun. The perveance, the beam flow pattern, and the minimum bunch flow diameter (waist) of the electron gun are obtained at the acceleration voltage of 30 kV and a cathode/anode radius of curvature ratio for 2. 2. The comparison of simulation result and theoretical calculation shows that both are approximately equal within the allowed error range. Key words: melting electron gun; generating system ;simulation: CST
出处
《桂林电子科技大学学报》
2016年第2期144-147,共4页
Journal of Guilin University of Electronic Technology
基金
广西制造系统与先进制造技术重点实验室主任基金(14-045-15-011Z)
关键词
熔炼电子枪
发生系统
仿真
CST
melting electron gun
generating system
simulation
CST