期刊文献+

红霉素分子印迹材料的制备及吸附性能 被引量:1

Study on Preparation and Adsorption Properties of erythromycin Molecularly Imprinted material
下载PDF
导出
摘要 以硅胶为载体,甲基丙烯酸(MAA)为功能单体,乙二醇二甲基丙烯酸酯(EDMA)为交联剂,采用表面接枝聚合法制备得到红霉素表面分子印迹硅胶材料(EM—MIP—PMAA/SiO_2),采用红外、扫描电镜对其结构进行了表征。研究了EM-MIP-PMAA/SiO_2的吸附动力学性质及选择吸附性能。研究结果表明,EM·MIP-PMAA/SiO_2对红霉素的吸附能力明显大于非印迹吸附材料(NIP-PMAA/SiO_2),EM-MIP—PMAA/SiO_2对红霉素的吸附存在两类不同的结合位点。EM-MIP—PMAA/SiO_2对红霉素和罗红霉素的吸附因子为1.51,具有较好的选择性。 In this paper, erythromycin molecularly imprinted silicone (EM-MIP-PMAA/SiOz) was prepared by surface polymerization method using silicone as carrier, methyl methacrylate as the functional monomer, ethylene glycol dimethacrylate (EDMA) as crosslinker.The prepared material was characterized by Infrared spectroscopy and scanning electron microscopy. The adsorption kinetics and selective adsorption properties of EM-MIP-PMAA/SiO2 were also studied. Results showed that the adsorption capacity of EM-MIP-PMAA/SiO2 on erythromycin was better than that of NIP-PMAA/SiO2.There were two kinds of binding site on the adsorption of EM-MIP-PMAA/SiO2 on erythromycin.The separation factor of EM-MIP-PMAA/SiO2 on erythromycin and roxithromycin was 1.51 ,showing high recognition ability to the template molecule EM.
出处 《齐鲁工业大学学报》 2016年第1期45-49,共5页 Journal of Qilu University of Technology
基金 国家自然科学基金(21406121)
关键词 硅胶 红霉素 分子印迹 接枝聚合 吸附性质 silicone erythromycin molecularly imprinted material graft polymerization adsorption property
  • 相关文献

参考文献9

  • 1SONG S,WU A,SHI X,et al.Development and application of mo- lecularly imprinted polymers as solid-phase sorbents for erythromy- cin extraction[ J] .Anal.Bioanal.Chem. ,2008 (390) :2141-2150.
  • 2寇星,耿立媛,雷建都,马光辉,苏志国.红霉素分子印迹聚合物纳米微球的制备及其吸附特性[J].过程工程学报,2011,11(3):481-486. 被引量:11
  • 3KANTIANI L, FARRE M, BARCELO D.Analytical methodologies for the detection of 13-1actam antibiotics in milk and feed samples [ J] .Trac Trends in Analytical Chemistry,2009,28(6) :729-744.
  • 4CANNAVAN A,AMSTRONG H S, BLANCHFLOWER W J,et al. Gas chromatographic-mass spectrometric determination of sulfa- metbazine in animal tissues using a methylftrimethylsilyl derivative [ J] .Analyst, 1996( 121 ) : 1457-1461.
  • 5MARTIN J, THOMAS K V J. Determination o f selected human pharmaceutical compound in effluent and surface water sample by high-performance liquid chromatography-electrospray tandem mass spectrometry [ J ] J Chromatogr, A, 2003 ( 1015 ) : 129-141.
  • 6CHAPUIS F, MULLOT J U, PICHON V G, et al. Molecularly im- printed polymers for the clean-up of a basic drug from environmen- tal and biological samples [ J ]. Chromatogr A, 2006,1135 (2) : 127 -134.
  • 7Arimn M, ILLER E I, Cormaek P. Molecularly imprinted solid- phase extraction of iazepam and its metabolites from samples [ J ]. Anal.Chem. ,2007,79( 1 ) :256-262.
  • 8WULFF, G. Enzyme-like catalysis by molecularly imprinted poly- mers[ J] .Chem. Rev,2002,102( 1 ) : 1-28.
  • 9SADEGHI H B, EBRAHIMI S A, TAMADDON A, et al.Potentio- metric sensing of lamotrigine based on molecularly imprinted poly- mer[ J] .Eleetroanaly,2011,23 ( 11 ) :2716-2723.

二级参考文献16

  • 1Liu C Y, Lin C C. An Insight into Moleeularly Imprinted Polymers for Capillary Electrochromatography [J]. Electrophoresis, 2004, 25(23/24): 3997-4007.
  • 2Ozcan A A, Say R, Denizli A, et al. L-Histidine Imprinted Synthetic Receptor for Biochromatography Applications [J]. Anal. Chem., 2006, 78(20): 7253-7258.
  • 3Matsui J, Goji S, Murashima T, et al. Molecular Imprinting under Molecular Crowding Conditions: An Aid to the Synthesis of a High-capacity Polymeric Sorbent for Triazine Herbicides [J]. Anal. Chem., 2007, 79(4): 1749-1757.
  • 4Wang S, Xu Z X, Fang G Z, et al. Synthesis and Characterization of a Molecularly Imprinted Silica Gel Sorbent for the On-line Determination of Trace Sudan I in Chilli Powder through High-performance Liquid Chromatography [J]. J. Agric. Food Chem., 2007, 55(10): 3869-3876.
  • 5Mosbach K, Leonhardt A. Enzyme-mimicking Polymers Exhibiting Specific Substrate Binding and Catalytic Functions [J]. Reactive Polymers, Ion Exchangers, Sorbents, 1987, 6(2/3): 285-290.
  • 6Takeuchi T, Haginaka J. Separation and Sensing Based on Molecular Recognition Using Molecularly Imprinted Polymers [J]. J. Chromatogr. B, 1999, 728(1): 1-20.
  • 7Li P, Yuan C W. Surface Plasmon Resonance Studies on Molecular Imprinting [J]. Sensors, 2002, 2(1): 35-40.
  • 8Bruggemann O. Catalytically Active Polymers Obtained by Molecular Imprinting and Their Application in Chemical Reaction Engineering [J]. Biomol. Eng., 2001, 18(1): 1-7.
  • 9Song S Q, Wu A B, Shi X Z, et al. Development and Application of Molecularly Imprinted Polymers as Solid-phase Sorbents for Erythromycin Extraction [J]. Anal. Bioanal. Chem., 2008, 390(8): 2141-2150.
  • 10Zhang Z H, Liu Y J, Long Y M, et al. Effect of the Size of Molecularly Imprinted Polymers Sensing Materials on Piezoelectric Quartz Crystal Sensor performance [J]. Anal. Sci., 2004, 20(2): 291-295.

共引文献10

同被引文献8

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部